Results for Artifake labs

Below are the posts that should have something to do with 'Artifake labs'.

Note: Use the search form in the top right if you're looking for something specific.

  

Artifake_Labs releases Redtron_SE v1.0, free Mellotron instrument

Related: , , , , , Posted in news on Apr 29, 2011 - comment 1 comment
Artifake_Labs Redtron_SE

Artifake_Labs has released Redtron_SE, a special edition version of the Redtron_400 virtual mellotron instrument for Windows.

This VST plug-in uses the Taijiguy’s Mellotron samples (taken from a 1973 Mellotron M400S – Serial #500)

The samples have been cleaned (not too much) by removing an annoying 60Hz hum and some unwanted “clicks” and “pops” here and there.

Redtron_SE v1.0 features

  • Nine sound types : MKII Flute, MKII 3 Violins, M400 Cello, MKII Brass, M400 Combined Choir, M400 String Section, M400 Woodwinds, M300A Violins, M300B Violin.
  • No loops : as the original Mellotron, each sound is eight seconds long with, in many cases, “the bad endings”.
  • Exclusive “Mellotronic Click” switch. On real Mellotrons, “Click” can be heard at the beginning of a note, when the tape comes in contact with the replay head. These “clicks” are here randomly generated, so you don’t hear twice the same and they can appear on any key ; A rotary knob allows you to control the effect intensity (of course, you can also completely disable it ). Note : this function is inactive when the attack parameter is set to any value different from zero.
  • Layer (two sounds A & B) and split possibilities (octave shift).
  • Independent parameters for sound A & B :
    • Volume, Tone, Pan, Tune, Reverb, Delay, Attack & Release, Octave & Note parameters.
    • Delay effect (Amount, Time, Feedback & Pan parameters).
    • Reverb effect (Mix, Width, Size & Damp parameters).
  • Global volume, tone, and pitch control.

Retron_SE is available as a freeware VST instrument plug-in for Windows.

More information: Artifake_Labs

Artifake_Labs releases RedTron_400

Artifake_Labs RedTron_400

Artifake_Labs has released RedTron_400, a free sample-based plug-in which emulates the Mellotron M400.

RedTron_400 features

  • Realistic user interface.
  • Six sound types: 3 Violins, 8-Voice Choir, Flute, Brass, String Section, Cello.
  • “Loop” and “Non-Loop” modes: as the original “Mellotron”, each sound is eight seconds long but you can switch to “Loop Mode” which allows the samples to loop continuously.
  • Layer possibilities & independent parameters for layer A & B:
    • Volume, Tune, Reverb, Delay, Pan, Octave, Note, Cutoff, Resonance, Attack & Release parameters.
    • Delay effect (Amount, Time, Feedback & Pan parameters).
    • Reverb effect (Mix, Width, Size & Damp parameters).
  • Global Volume control.
  • Global Tone control.
  • Global Pitch control.
  • Can be used as SoundFont Player to mix any .sf2 file with “Tron sounds” or to extend the sound palette.

RedTron_400 is available as a freeware VST instrument plug-in for Windows PC.

More information: Artifake_Labs

Artifake_Labs releases RedTron_MKV

Artifake_Labs RedTron_MKV

Artifake_Labs has released RedTron_MKV, a free VST instrument plug-in for Windows.

RedTron_MKV emulates the “Mellotron MKV” (essentially a double M400), one of the rarest Mellotron ever made. RedTron_MKV is a sample-based plug-in, made with Synthedit.

RedTron_MKV features

  • Realistic user interface.
  • Six sound types : 3 Violins, 8-Voice Choir, Flute, Brass, String Section, Cello.
  • “Loop” and “Non-Loop” modes : as the original “Mellotron”, each sound is eight seconds long but you can switch to “Loop Mode” and allows the samples to loop continuously.
  • Layer possibilities & independent parameters for layer A & B :
    • Volume, Tone, Reverb, Delay, Pan, Octave, Note & Attack parameters.
    • Delay effect (Amount, Time, Feedback & Pan parameters).
    • Reverb effect (Mix, Width, Size & Damp parameters).
  • Pitch control.
  • Can be used as Soundfont Player to mix any .sf2 file with “Tron sounds” or to extend the sound palette.

RedTron_MKV is available for download as a freeware VST instrument for Windows PC.

More information: Artifake_Labs

Artifake_Labs releases RedTron

Artifake_Labs RedTron

Artifake_Labs has released RedTron, a freeware VST instrument for Windows PC.

RedTron is an updated version of the previously released Meltron MKX.

RedTron emulates “The Mellotron”, one of the most famous tape replay keyboard. RedTron is a sample-based VST plug-in, made with SynthEdit and totally free.

RedTron features

  • Five sound types: 3 violins, 8-Voice Choir, Flute, Brass, String Section.
  • “Loop” and “Non-Loop” modes: as the original “Mellotron”, each sound is eight seconds long but you can switch to “Loop Mode” and allows the samples to loop continuously.
  • Layer possibilities & independent parameters for layer A & B:
    • Attack, Release, Pan, Octave, Note, Pitch, Tone & volume parameters.
    • Delay effect (Amount, Time, Feedback & Pan parameters).
    • Reverb effect (Mix, Width, Size & Damp parameters).
  • “Tape Noise” knob to simulate tape hiss.
  • Can be used as Soundfont Player to mix any .sf2 file with “Tron sounds” or to extend the sound palette.

RedTron is available as a freeware VST instrument for Windows PC. Download it here (MediaFire).

Visit Artifake_Labs for more information.

Artifake_Labs releases Meltron MKX

Related: , , , , , Posted in news on Jun 05, 2009 - comment 1 comment
Artifake_Labs Meltron MKX

Artifake_Labs has released Meltron MKX, a free VST instrument plug-in for Windows.

Meltron MKX emulates “The Mellotron”, one of the most famous tape replay keyboard. Meltron MKX is a sample-based plug-in, made with SynthEdit and totally free.

Meltron MKX features

  • Five voice types: 3 violins, 8-Voice Choir, Flute, Brass and String Section.
  • “Loop” and “Non-Loop” modes: as the original “Mellotron”, each sound is eight seconds long but you can switch to “Loop Mode” and allows the samples to loop continuously (more easily playable).
  • Layer possibilities and independent parameters for layer A and B.
  • Attack, Release, Pan, Octave, Pitch, Tone and volume parameters.
  • “Tape noise” knob to simulate tape hiss.
  • Tape Delay effect (Amount, Time, Feedback and Pan parameters).
  • Spring Reverb effect (Amount, Size, Damp and Pan parameters).
  • Can be used as SoundFont Player to mix any .sf2 file with “Tron sounds”.
  • Low CPU load.

Meltron MXK is available as a freeware VST instrument for Windows PC. Download it here (41MB .dll, MediaFire).

Visit Artifake_Labs for more information.

Artifake_labs releases Meltron

Related: , , , , Posted in news on Oct 22, 2007 - comment 7 comments
Artifake_labs Meltron

Artifake_labs has released Meltron, a freeware VST plugin which recreates the sound of the Mellotron.

Meltron features

  • Four voice types : Strings, Choir, Flute, Brass
  • Attack, Release, Pan, Octave, Pitch, Tone & Master volume parameters
  • “Tape noise” knob to simulate tape hiss
  • Tape delay effect (Amount, Time, Feedback & Pan parameters)
  • High quality samples
  • Very low CPU load

Meltron is a sample based plugin (10.4 MB), available for Windows PC.

Visit Artifake_labs for more information and a link to download Meltron.