Results for covers

Below are the posts that should have something to do with 'covers'.

Note: Use the search form in the top right if you're looking for something specific.

  

Skin – Protect your MASCHINE from liquids, dirt & debris

Related: , , , , , Posted in news on Oct 16, 2013 - comment 0 comments

Skin has launched its protective covers for the Native Instruments MASCHINE controllers.

Skin is a thin layer of tough silicone specifically designed to protect your Maschine. It completely covers Machine, under the knobs and over the pads, so it is impossible for liquids or dirt to spill in the cracks.

There are other Maschine covers out there. There are hard cases that prevent any live jamming. There are covers with holes for the pads, buttons and knobs. They come in cool colors, but stuff can still spill in the cracks.

Skin Maschine protection

Skin is a better idea. Whether at home or in the club, your Maschine is exposed to dust and dirt and can get all kinds of stuff spilled on it.

Skin is made of thin silicone that is extremely durable, yet incredibly pliable, and covers the whole surface. It even goes under the knobs for a tight seal. It keeps any dust, dirt and liquids from getting down inside, and prevent nasty scratches from marring the outside. Don’t worry – Skin is so thin that your pads are still velocity sensitive.

You spent some decent coin to get your Maschine. Skin protects your investment.

Skin is available for Maschine Mk1/Mk2 for $29.99 USD, the Maschine Mikro MK1/MK2 cover is $17.99 USD.

More information: Skin – Protect Maschine

comment

Short links for July 12th, 2011

Some interesting things I found recently:

# PERSPECTIVE LYRIQUE via Make:Blog

An interactive architectural mapping.
Fete des Lumieres / Lyon / France / 2010

A mapping by 1024 Architecture, projected on the facade of former Lyrical theater the “Celestins”. The building deformations and figures were controlled by the audience, using a microphone and an audio analysis algorythm.

More info at 1024architecture.net and 1024d.wordpress.com

# Dan303: Tenori-On iPad app review

Dan Weatherall on the TNR-i for iOS:

Yamaha TNR-i

The official Tenori on iOS app enter the app store the other week but at £12 I was a little hesitant to buy it. After a little thought and a bit of googling I decided it was indeed worth the price.

The cheapest hardware Tenori-On (the TNR-O) is roughly £500 where as the current price of the iPad 2 is £499 (cheapest wifi only model) so considering that both the devices are pretty much exactly the same price (and I already own an iPad) it makes sence to get the iOS version.

# Thumbs Up for Madrona Labs AALTO Software Synthesizer (Modulate This! – A Blog for Electronic Music Artists)

Madrona Labs Aalto

Mark Mosher shares some info on the Aalto semi-modular software synth.

Peter Kirn over at Create Digital Music did a post on a new synth by Madrona Labs last month. Even though I wasn’t in the market for a new synth right now I ended up buying this Aalto within an hour or so of downloading the demo so I wanted to pass this along and help promote Madrona’s great work. At $99 this is an incredible value.

# From the Trenches of the Loudness Wars, A Broad Survey of Research
Peter Kirn writes:

You’ve heard the gripes, and heard and seen the somewhat unscientific demos. Now it’s time to examine the over-compression of music with – science! Earl Vickers of STMicroelectronics examines the Loudness Wars in an academic paper, as noted to us by reader photohounds.

# Flickr: LEGO Album Covers via wire to the ear

Flickr LEGO Album Covers

# little-scale: Tau Percussion Sample Pack

Sebastian Tomczak has posted a nice free sample pack.

I made a small set of percussion samples using a waveform generated from the first 614 digits of 2π. Download it here: http://milkcrate.com.au/_other/downloads/sample_sets/Tau_Kit.zip

# Talking About The Upcoming Sound Packs With Elliott Fienberg

Nick of Nick’s Tutorials:

Elliot Fienberg aka MrTunes

I just finished recording a really enjoyable conversation with Elliott Fienberg, the man behind the Wobble Tech Radio podcast.

We chatted about some recording industry news and talked a bit about my upcoming Ableton Live packs that I’ll start releasing in the next month or so.

Check out the recording here, and be sure to check out Elliott’s other episodes: http://mixlr.com/mrtunes/wobble-tech-radio-10-with-the-ableton-tutor

# Dan303: Analog acid/minimal bass stabs (multisample)

More free samples from Dan303:

These multi samples were taken from my FreeBass FB383 bassline synth. It’s a rackmount analog bass synthesizer (clone of the Roland TB303).

Rockit 8-bit Synth Kit

# Open-Source Rockit 8-bit Synth Kit Coming

Peter at Create Digital Music:
Chicago-based hacker and synthesist Matt Heins is working on an open source synth kit. As a co-creator of the MeeBlip open source-synth hardware, I’m biased — I want more open synth hardware! So this is looking like some great company. The instrument is 8-bit, with analog filter circuitry, coded in C.

comment

Short links for November 13th, 2009

Christian Marclay album cover art

Some interesting things I found recently:

# Even retro record covers can be used to create something amazing

There are those who will throw away their old record covers but there are those that will use them to create some mind blowing artistic stuff.

One of them is definitely Christian Marclay, a New York visual artist, DJ and composer who used record covers of Michael Jackson , Doors, Donna Summer, David Bowie and many others for this piece of art. The relationship of sound, vision, music, art and performance is the focus of his work.

More on Christian Marclay

# Waveformless: Free Sample Friday: Pro One Synthetic Percussion

More samples at Tom Shear’s Waveformless blog:

It's hard to believe another weekend is upon us, but it is, so here are some more free samples to get your weekend off to a good start. This time, it's a set of 21 24-bit synthetic percussion sounds I made on my Sequential Pro One

DIY Sound System with garbage cans

# Two Garbage Cans and a Microphone

Rock the party with this DIY sound system.

Peter Kirn writes:

Say you’re an up-and-coming crew with a turntable and some mics. You’ve got a gig this Friday at the middle school gym (the janitor has been bribed appropriately) and the boys on the corner have been passing out your flyers to all the lovely ladies. Everything’s set, except you heard that Kool Herc is coming to battle. Herc and his mighty sound system schooled you last go-round, so you know you need something fresh to rock the bodies proper. Your DIY solution? The 55-gallon drum sound system.

# Tape Pianos Sample Pack

The Control Centre has posted a sample pack features 38 piano samples in 44k 16 bit mono format.

This samplepack contains 3 pianos I recorded to tape in 1998. A Baby Grand, a Fender Rhodes and an old upright a friend of mine had in her back kitchen. I recorded the pianos using a Tascam 244 Cassette Portastudio and a Shure SM58 microphone. The Fender Rhodes was recorded to tape directly from it's line output. The recordings were then sampled using a Yamaha A3000 sampler.

I recently exported the samples from the A3000 sampler to my laptop computer via floppy disk, and then imported them into Ableton Live's Sampler. To save each piano into your Live Library, load the project, then save each sampler as a preset inside Sampler's preset browser. Live will copy the samples to your library automatically.

If you don't have Live 8 and Sampler, you can still use the samples to recreate these pianos in your choice of software.

Kontakt, Wusikstation, and Mutools available here

# The Octapult (YouTube)

The "Octapult" is a kinetic sculpture designed and built on commission by Bradley N. Litwin of Philadelphia, PA. With 8 synchronized catapults, 160 plastic balls per minute are launched, caught, and recirculated. Made mostly of wood, the work is ~36 inches in diameter. On permanent display in the lobby of Lower Merion Elementary School, Merion Station, PA. Also a performing jazz musician, more of Litwin's work may be seen and heard at www.bradlitwin.com.

# XeroWorld

XEROWorld is the next phase in the evolution of online arts & entertainment — a totally new and unique web destination that seamlessly integrates social networking, interactive events, magazine style-news, and online malls.

Yaktronix Electronically Modified Didgeridoo

# Yaktronix: Electronically Modified Didgeridoo

Kyle Evans modified a didgeridoo to experiment in the combination of the organic sound qualities of a didgeridoo with the advanced signal processing capabilities of modern computer programming and sound synthesis.
He writes:

This custom built didgeridoo features externally mounted modules that allow the performer to process and manipulate the sound of the instrument in real time. All control data is transmitted wirelessly via blue tooth and is controlling several audio processes created in a custom-built software environment.

# Review: Roger Linn Design AdrenaLinn Sync

Tom Shear reviews AdrenaLinn Sync, a new software plug-in from Roger Linn Design that provides the same unique beat-synced filter modulation and sequencing effects of our AdrenaLinn III guitar pedal.

Cyrille Arndt DIY Arduino-based MIDI controller

# DIY Arduino-based MIDI controller

Cyrille Arndt’s DIY, standalone Arduino-based, MIDI control surface work-in-progress.

Current features:

  • Heartbeat
  • On-the-fly generated labels from csv files.
  • Limiters (with capability of inversing the range).
  • Every function of the faders and pads is customisable from the desktop software.
  • Different states for the pads (currently on/off or moment).
  • In the desktop software: Selecting the MIDI port (for example for routing over another software).
  • MIDI channel.
  • 6 presets (more possible).
  • RGB pads can be controlled from software like Live to be switched on/off or blinking.
  • Presets also concern the pads.
  • Auto-switch to generated labels if the software is running.
  • New! The buttons above the faders can have different functions : Notes (triggering clip for example), quick change of the function of the fader, preset switching.
  • New! Presets also concern the limiters.
  • New! The bottom buttons can change the preset or the bank (useful in Ableton Live).
  • New! USB port for adding USB connectivity: allows to program it easily and use USB instead of MIDI in cases where it’s necessary.

# Live Music Makers Ask: How Can We Get in Sync?

Peter Kirn writes:

Synchronization is, by definition, a tough thing to do. But musical engineering is replete with challenges; it’s no longer acceptable to simply say “live with it” and walk away. It seems we need both better shared knowledge about what sync is how to make it work, and better engineering solutions on the software and protocols side to support the way users want to work. And yes, we need a new sync standard that goes beyond what’s presently available in MIDI alone

Bleep Labs Thingamagoop 2

# Bleep Labs » Thingamagoop 2 is here!

New in Thingamagoop 2:

  • Analog VCO controlled by analog or digital signal from Arduino. (A separate Arduino board is not required)
  • Sample and hold, Arpeggios, noise, and bit crush effects with open source code so you can program your own sounds!
  • All the analog sounds of the original Thingamagoop.
  • Controllable LEDacle – Ramp and random waveforms with rate control.
  • New modulators – Square wave amplitude modulator and triangle wave pulse width modulator.
  • Tough, stomp box type body with silk screened graphics in 3 different styles.
  • Easy to access battery – No more screws!
  • Much fuller and louder speaker.
  • CV in and out.
  • Arduino Programmer jack. Easily hook an Ardunio board up to the Thingamagoop 2.
  • Kit now comes with a pre-drilled enclosure.
  • Still assembled in Austin, Texas by Dr. Bleep and friends.

# Tunited

Tunited is a groundbreaking new independent music website which will assist new and independent artists and labels gain increased exposure, challenging the flagging music business’ growing reluctance to invest in this exciting area.

The top 100 artists will upload their music catalogue onto the website prior to launch; it will then be made available to the press and music industry for showcasing before the site goes live.

To become a profile artist, please click on the button below to enter your details and upload your track before midnight on 11.12.09. Your music will be judged by Tunited's panel of experts including Midge Ure OBE.

Nerdkits DIY marquee LED array display

# Voice2LED Project

Josh made a LED sign which displays voicemails from his Google Voice account.

I made the LED sign following instructions from this tutorial on Nerdkits.com. The hardware is some LED’s, a nerdkit, a piece of cardboard and a bit of wire that I got from some Cat 5 cable laying around. I cut out the cardboard and printed a grid to help me lay out the LED’s. I think mine were 1 cm apart. The soldering took forever and it was the first real time I did any soldering so it looks kinda crappy. Oh well. It works. The sign itself is powered by a 9 volt battery and receives data from my laptop through the serial port via a USB adapter. All that stuff was included in the Nerdkit when I bought it. The microcontroller is running code from the tutorial I mentioned earlier. One of these days I’m going to make an enclosure for this thing.

# little-scale: FM is for the PEOPLE – VOL. 1 – Out Now!

Sebastian writes:

Compiled by notorious OPL buff , Oxygenstar, this release serves up a healthy dose of frequency modulation synthesis which varies nicely in both style and technique.

comment

Short links for March 9th, 2008

Some interesting things I bookmarked on del.icio.us on March 9th, 2008:

exc012: 833-45 - Tunguska
exc012: 833-45 – Tunguska (download here)
  • Meal of the Week 2 – Deep fried onion loaf. Yummy!
  • Hallelujah – It Doesn’t Matter Which You Heard: the Curious Cultural Journey of Leonard Cohen’s Hallelujah
  • Charles & Marie: Hot Cold Mug – PRESALE – At plain sight it is a standard black mug as they come a dime a dozen and in big white letters it say COLD. Nothing fancy, but once you add the hot beverage of your choice, the mug changes color and is turning white and in big black letters it states: HOT
  • Top 10 Ways to Get Cables Under Control – I’ve made a good start by wiring my extension cord under my desk.
  • Wheel of Fortune, Jeopardy Powered by Ableton Live – … this real-time music production software is used for instantaneous sound effects and music clips needed in the fast-paced world of two popular game questions. What is … Ableton Live?
  • 1,000 True Fans – Kevin Kelly writes: A creator, such as an artist, musician, photographer, craftsperson, performer, animator, designer, videomaker, or author – in other words, anyone producing works of art – needs to acquire only 1,000 True Fans to make a living.
  • Netscape 9 Users: Time to Flock or Firefox – No idea how it ever lasted this long.
comment