Results for Exponential Audio

Below are the posts that should have something to do with 'Exponential Audio'.

Note: Use the search form in the top right if you're looking for something specific.

  

Exponential Audio updates PhoenixVerb Surround & R2 Surround to v1.1.0

Related: , , , , , , , Posted in news on Aug 28, 2014 - comment 0 comments

Exponential Audio has released version 1.1.0 of PhoenixVerb Surround and R2 Surround, two reverb effect plug-ins for Windows and Mac.

Exponential Audio R2 Surround Reverb

Along with numerous improvements, this release also includes Exponential Audio’s unique new 3DLink technology.

Changes in v1.1.0

  • 3DLink supports new mixing formats with height channels such as Dolby Atmos and Auro 3D, and creates a natural, efficient reverb with channel counts up to 14.1. No special drivers are required, and all you need is a workstation that supports low and high busses.
  • More DAWs supported: Steinberg Nuendo, Cockos Reaper.
  • New surround formats for workstations that support them.
  • Performance and workflow improvements.
  • New presets.

PhoenixVerb Surround is available for purchase for 279 EUR/$359 USD; R2 Surround is 359 EUR/$459 USD. A bundle of both is 509 EUR/$659 USD. Version 1.1.0 is free to all licensed users.

More information: Exponential Audio

comment

Exponential Audio intros 3DLink for Surround reverbs

Exponential Audio has announced it will soon be shipping 3DLink for its surround reverbs.

Exponential Audio 3DLink
3DLink is an extension to PhoenixVerb Surround and R2 Surround reverbs that supports reverb configurations up to 14.1, even on workstations without 3D tracks.

Dolby Atmos and Auro3D are the primary applications for 3DLink, but it can also be used for live applications as well as venues and attractions requiring height channels.

3DLink works by combining pairs of surround reverbs (one on low bus and the other on high) into single reverb entities, with audio shared in a natural way between the two. Parameters may be locked or independent. 3DLink may be used to synthesize a full 3D reverb from a simple 2D–or even mono–signal. 3DLink may also be used in conjunction with a 3D panner to create a fully responsive reverb, with natural propagation of input from up to 15 simultaneous channels–high and low.

3DLink for Surround reverbs will be part of the v1.1.0 release, which will be free to all licensed users.

More information: Exponential Audio

comment

Exponential Audio updates Stereo Reverbs to v2.0.0 & Surround Reverbs to v1.0.1

Related: , , , , , , , Posted in news on Feb 21, 2014 - comment 0 comments

Exponential Audio has announced the release of version 2 of its PhoenixVerb and R2 stereo reverb plugins, and version 1.0.1 of the PhoenixVerb & R2 Surround reverb plugins.

PhoenixVerb Surround

PhoenixVerb and R2 v2.0.0

This new version features a radically redesigned GUI with a modern appearance and improved visibility. Simple navigation and overall ease-of-use remain the same. The plugins are fully-compatible with earlier versions.

There are many additional features which have been adapted from the popular Exponential Audio surround reverbs. These include the Favorites list and user-controllable CPU load-balancing for increased processor efficiency. There are several new preferences to help tailor the plugins to the user’s way of working. And finally each plugin has dozens of new presets, making it even easier to find the right sound for the application.

PhoenixVerb Surround and R2 Surround v1.0.1

This new version adds support for several new workstations, along with bug fixes and dozens of new presets.

PhoenixVerb and R2 are available to purchase for $199 USD and $299 USD repspectively, PhoenixVerb Surround and R2 Surround are $359 USD and $459 USD respectively. Bundle packages are also available. The updates are free to all current users.

More information: Exponential Audio

comment

Exponential Audio updates PhoenixVerb & R2 to v1.5.0

Exponential Audio

Exponential Audio has updated its PhoenixVerb and R2 reverb effect plug-ins to version 1.5.0.

Improvements include AudioSuite support for AAX plugins, a number of new presets, and several bug fixes.

Changes in PhoenixVerb v1.5.0 / R2 v1.5.0

  • Moved logs (on Mac) to /Library/Logs/ExponentialAudio.
  • Fixed some potential permissions in Mac installer.
  • Windows build uses new AAX SDK.
  • Added presets [PhoenixVerb]: Back Yard, Deep Hall 2, Lge Stone Church 2, Slapback Explosion 2, Small Far Hall 2, Small Close Hall 3, [R2]: Lge Far Cham 2, Med Guitar Hall 3, Rich Guitar Hall 3, Lge 81 Plate 2, Lge Random Plate.
  • Fixed a bug that had found its way into the first beta. This caused the preset name not to be refreshed in the preset selector when using a mouse.
  • Fixed a few buffer initialization bugs.
  • [R2] Fixed a bug in the ProTools automation page tables. Early/Reverb filter frequencies were not being automated. Now they are.
  • [R2] Fixed a minor VST issue that caused the plugin to show up in the wrong category.
  • Added AudioSuite processing. AAX only.
  • Fixed a very rare issue that could cause a hang on removing plugins from a project (or on shutting down).
  • ProTools only: Program changes are now shown under automation. In order for this to work, all parameters (except bypass) must be automated.
  • Fixed a small bug that caused the zoom button to appear when the screen was too small to allow zoom.
  • Fixed an initialization issue that could theoretically cause a plugin to launch without passing audio. This problem was never observed in this plugin.
  • Added detection of Fairlight Dream II DAW.

PhoenixVerb and R2 are available to purchase for Mac and Windows (AU/VST/RTAS/AAX) for $199 USD and $299 USD respectively. A bundle of both plug-ins is $449 USD.

More information: Exponential Audio

comment

Exponential Audio updates Phoenixverb & R2 to v1.4

Related: , , , , , , , Posted in news on Oct 07, 2013 - comment 0 comments
Exponential Audio

Exponential Audio has announced the release of version 1.4 of the PhoenixVerb and R2 reverb effect plug-ins for Windows and Mac.

Changes in PhoenixVerb / R2 v1.4

  • Changed the way factory presets are loaded and managed. Startup is now much faster.
  • Cleared up some problems in deleting and managing user presets.
  • Fixed a minor issue that caused the wrong button to display in the preset editor.
  • A few factory presets had been stored with Mix at a different value from 100%. That has been corrected.
  • A few efficiency gains and speedups.
  • Slightly smoother drawing of the realtime frequency display
  • Eliminated some ticks from program change
  • New memory clearing logic (for relocating) is spread out and less ‘lumpy’ in terms of processor requirements.
  • Fixed mono->stereo bypass.
  • The binary is now ‘wrapped’ so that license codes can be entered directly.
  • Added several presets
    • Phoenix: Plates and Chambers, a handful of large halls and churches. Percussion halls.
    • R2: Large Hall presets.

PhoenixVerb and R2 are available for Mac and Windows (AU/VST/RTAS/AAX, 32/64bit), priced at $199 USD and $299 USD respectively. A bundle of both is $449 USD.

More information: Exponential Audio

comment

Exponential Audio updates PhoenixVerb and R2 to v1.3.1

Related: , , , , , Posted in news on Aug 08, 2013 - comment 0 comments
Exponential Audio

Exponential Audio has announced the release of version 1.3.1 of its PhoenixVerb and R2 reverb effect plug-ins for Windows and Mac.

This is a minor update focused primarily on ProTools AAX users. GUI automation support is now enabled.

Other users will find a few more presets as well as some improvements for rare stability problems related to iLok. Alt-Click now resets any parameter to its default (as stored in the current preset).

The updates are available to existing users at no cost.

More information: Exponential Audio

comment

Exponential Audio updates PhoenixVerb & R2 to v1.3

Related: , , , , , , , Posted in news on Jun 25, 2013 - comment 0 comments
Exponential Audio R2

Exponential Audio has announced the release of version 1.3 of its PhoenixVerb and R2 reverb effect plug-ins for Windows and Mac.

Changes in v1.3

  • AAX-64 bit: ProTools 11 is now fully supported on Mac and Windows. Avid has been showing both of these plugins in recent trade shows, including NAB and NAMM. Exponential Audio is immediately ready for the public release of PT11.
  • EuControl support: Major control surfaces from Avid and Euphonics are now well supported by Exponential Audio. The plugins now integrate smoothly into a console-based workflow.
  • Several minor bug fixes and new presets.

PhoenixVerb and R2 are available for Mac and Windows (AU/VST/RTAS/AAX, 32/64bit), priced at $199 USD and $299 USD respectively. A bundle of both is $449 USD.

More information: Exponential Audio

comment