Sonnox has announced the release of AAX version of its Oxford Dynamics effect plug-in for Windows and Mac.
We’re excited to have released the AAX version of the acclaimed Oxford Dynamics plug-in. Both AAX DSP and AAX Native versions can be used as a surround buss compressor / limiter (previously only available in the TDM version) and the plug-in has improved metering.
Sonnox celebrates the AAX version of Dynamics with a 40% discount.
Oxford Dynamics features
Fully 64-bit compliant.
The dynamics section from Sony OXF-R3 console.
Separate sections for Compressor, Gate, Expander, Limiter.
2-Band side chain EQ (with audition function).
Warmth control for extra presence and tube-like warmth.
Three different compressor types (linear and exponential curves).
Variable soft knee compressor.
Separate 5.1 bus compressor (where supported).
Ultra low noise and distortion.
The Oxford Dynamics plug-in is available at a 40% discount until March 31st, 2013.
Ochen K. has released A-Series 1 and A-Series 2, two modular synthesizer Rack Extensions for Propellerhead Reason.
The A-Series 1 and 2 modular synth Rack Extensions by Ochen K.
The A-Series Modular Synth is the first fully modular synth for Reason, where you can design your synths however you want for whatever sound you can imagine. And because all the modules are mix-and-match, all those Reason effects and devices that you already have can go right inside your custom synth.
A-Series Modular Synth features
The A-Series 1 rack extension contains the following modules:
A-19SEQ – A midi-to-CV converter, receiving midi signals from a midi keyboard or the Reason sequencer, of from rack sequencers like the Matrix, and converts the signals into CV (note) data and gate (velocity) data. These signals can then be routed to control any other device, such as a VCO or envelope generator.
A-11VCO – A voltage controlled oscillator generating four waveforms – saw, square, triangle, and sine – all at the same time. The A-11VCO has a 7-octave range with coarse and fine tuning, can accept and mix a second pitch modulation signal to create FM-like effects, and can modulate the pulse width of square waves. Each parameter can be controlled by CV input.
A-14ADSR – An envelope generator with three speed ranges and standard attack, decay, sustain, and release parameters. Each parameter can be controlled by CV input.
A-13VCA – A voltage controlled amplifier allowing multiple signals to control a sound’s gate shape, with two gain CV ins and a two-in audio mixer. Each parameter can be controlled by CV input.
A-14LFO – An LFO with four signal waveforms – saw, square, triangle, and sine, three cycle speed ranges, with both free-running and tempo-synced cycles, and pulse width modulation of the square wave signal. Each parameter can be controlled by CV input.
The A-Series 2 rack extension contains the following modules:
A-19POLY – A polyphonic to monophonic splitter allowing for the creation of polyphonic synths. The A-19POLY supports up to eight voices, each with independent gate and CV data, and three note assign modes: lowest first, sequential (round robin), and random.
A-14SH – A sample and hold module allowing the sampling of CV data and holding that sample constant until a new sample period is triggered.
A-11NOISE – An audio noise generator and a random CV generator. The audio noise generator can generate white noise, pink noise, brown noise, and any blend in between. Each parameter can be controlled by CV input.
A-12VCF – A voltage controlled filter with a four-poll high-pass and low-pass filter, a band-pass filter when used in combination, and CV control over each frequency cutoff.
A-11RM – A ring modulator taking two audio signals and modulating them to produce a single audio result.
A-13MIXER – A six channel mixer with six audio ins and one master audio out. The level of each in and out can be controlled by CV signals.
The A-Series Rack Extensions are available to purchase for 7.50 EUR each.
Unfiltered Audio has launched G8, a dynamic gate Rack Extension for Propellerhead Reason.
G8 version 1.1 features “hysteresis”, which gives G8 a “bottom threshold” that your sound must pass below before the gate closes back up.
G8 is a high-quality noise gate with many advanced and useful features, including CV control over everything, Hysteresis, a Reject Output, a Flip Mode, and more. Without a doubt, G8 is the most fully featured noise gate available for Reason.
Use it for noise removal, transient shaping, amplitude-dependent effects routing, glitchy rhythms, and much more. A large number of presets and combinator patches will get you started!
The G8 Rack Extension is available to purchase for 25 EUR.
AfroDJMac has released another free Ableton Live Pack: Gated Reverb.
The 1980s brought us some pretty cool production techniques. I often try to emulate them in Ableton. One of the more timestamped effects is gated reverb.
Producers wanted huge drum sounds, but didn’t want the drums washed out in reverb. The solution was found by placing a gate after the reverb. This will suddenly silence the reverb once it drops to a certain level. Think Phil Collins’ “Coming in the Air Tonight.” If you have ever wanted your drums to sound like they were being played by Godzilla in the Grand Canyon, this is the technique for you.
The Gater Reverb Rack is a free download at AfroDJMac.
Tek’it Audio has announced the release of GattR, a sequenced stereo gate effect plug-in for Windows.
Link the sequencers to create the same sequence synced on the tempo of your DAW. Control the speed of the steps, change the play direction of the sequence. Create stereo gate, chop and fade effects on the 32 steps sequencers and mix them with your original sound! Randomly generate your effect with a single click. Undo your changes on all the parameters, just as easily. Assign all the parameters to your MIDI controller easily. Click on “Learn” on the parameter, move the control on your MIDI controller, and that it’s!
Create cutting edge stereo gate, chop, fade effects synchronized to your DAW.
32 steps stereo modulation sequencer, synced to your host.
Sequencers can be linked.
Sequencer play forward or reverse.
Effect output gain control.
Wet and dry signal mix.
Full MIDI automation support.
Easy MIDI learn on all parameters.
Use 7-bit MIDI Continuous Controller or High resolution 14-bit MIDI NRPN and RPN.
Sonalksis has announced its 10 Year Anniversary, offering a ‘once in a decade’ discount for a limited time.
10 years ago in Liverpool, England, the founding members of Sonalksis produced the SV-315 Equaliser plugin, the first host based processing EQ to offer professional studio quality in an affordable package ‘in the box’. The specs at the time were quite remarkable, internal 64 bit audio processing and the ability to run over 80 instances on a Pentium PC or G4 Macintosh (both leading edge machines at the time).
Over the following two years the team expanded the ‘Essentials Collection’ to include the SV-315 Compressor and the SV-517 Analogue Gate, and then went on to produce some of the most highly respected plugins for tracking, mixing and mastering available today.
To help celebrate the first 10 years of Sonalksis we are offering a ‘once in a decade’ discount of 60% off all Sonalksis plugins and bundles until the end of the month!
To take advantage of this discount use coupon code DECADE60 at checkout. The promotion ends October 31st, 2012.