Results for Ichiro Toda

Below are the posts that should have something to do with 'Ichiro Toda'.

Note: Use the search form in the top right if you're looking for something specific.

  

Ichiro Toda updates Synth1 to v1.13 beta2 (incl. new filter)

Related: , , , , , Posted in news on Jul 08, 2014 - comment 0 comments

Ichiro Toda has released version 1.13 beta 2 of the Windows version of Synth1, a freeware synthesizer instrument.

Synth1

Synth1 is a software synthesizer. Functionally it is modelled on the Clavia Nord Lead 2 Red Synth.

Changes in Synth1 v1.13 beta2

  • A new filter “LPDL” has been added in filter section.
    • It is a low-pass filter modeled after the diode ladder mounted on TB303, etc.
    • It is close to “LP24″ Because it is the filter of the fourth order, but it is fat and darker than “LP24″ feel.
    • Lower frequency also increase the resonance does not decrease. I think that it fits well in the synth bass.
    • This filter is over-sampling process if the sampling frequency is 44.1/48KHz.
  • Accuracy of the square wave has been improved. (8 multiple detune of osc1 are excluded)
  • Cut-off frequency of the “LP24″ is now moving more smoothly.
  • BugFix
    • Fixed a problem that a big noise has occurred at synth1 startup once in a while.
    • Fixed a problem that the LFO is not synchronized with the DAW once in a while.
    • Fixed a problem that the sound of synth1 is greatly changed once in a while when you change the sampling frequency in DAW.
    • Fixed a problem that DAW is crushed once in a while when you change the sampling frequency in DAW.

The new beta is available to download for Windows (32/64-bit VST).

More information: Synth1

comment

Ichiro Toda updates Synth1 to v1.13 beta1 (incl. 64-bit)

Related: , , , , Posted in news on Jun 12, 2014 - comment 0 comments

Ichiro Toda has released version 1.13 beta 1 of the Synth1 freeware synthesizer instrument for Windows and Mac.

Synth1

Synth1 is a software synthesizer. Functionally it is modelled on the Clavia Nord Lead 2 Red Synth.

Changes in Synth1 v1.13 beta1

  • 64bit version is available.
    • you can use synth1 on 64bit daw.
    • 32bit plugin file is “Synth1 VST.dll”, 64bit plugin file is “Synth1 VST64.dll”.
  • VST version up to 2.4. (both of 32bit/64bit)
    • There is no change to the previous version in functionality.
  • BugFix
    • Fixed a problem that occurred is petit noise on MusicMaker.

Synth1 is available to download at no charge. Version 1.13beta7 for Mac (32-bit AU) was also released.

More information: Synth1

comment

Noisecrux releases free Synth1 Preset Bank

Noisecrux Synth1 Preset Bank

Noisecrux has released the Synth1 Noisecrux Preset Bank, a free collection 128 presets for the Synth1 software synthesizer by Ichiro Toda.

I have built a library of presets over time and now I’ve decided to share some of my favourite ones.

This is Synth1 bank of 128 original presets covering basses, leads, keys, pads, FX and percussion sounds.

They are useable for a wide variety of electronic music styles, but probably more oriented towards ambient, chill, drum and bass, glitch or dubstep.

The soundset is a free download at Noisecrux.

More information: Noisecrux / Synth1 Preset Bank

comment

Ichiro Toda intros Synth1 for iOS

Related: , , , , , Posted in news on Nov 02, 2012 - comment 3 comments

Ichiro Toda has posted a teaser screenshot of iPhone and iPad versions of Synth1, the popular freeware synthesizer plugin.

Synth1 for iOS

synth1開発は思うように進んでないけど、来年の春までにはiPhone/iPad版をリリースしたい。その前にMac AU版を出さないとな。そしてその前にsubversionのセットアップしないとな!

写真は、iPhoneとiPadでSynth1を動作させてるところ。

My Japanese isn’t too great, but it seems that an iOS version of Synth1 is scheduled for release in Spring 2013.

More information: Ichiro Toda

comment

Rage free Synth1 soundset by Emerge Audio

Emerge Audio has announced the release of Rage, a soundset for the Synth1 software synthesizer for Windows and Mac.

Rage for Synth1

Emerge Audio proudly presents a new free soundbank of 40 patches for Ichiro Toda Synth1.

It contains basses, arps, pads and other presets. They are categorized and available for free download.

Rage is a free download (no registration required).

More information: Emerge Audio

comment

The Analog Dream Soundbank for Synth1 by TNK

TNK aka Philippe Meisburger has released the Analog Dream Soundbank, a collection of 128 patches for Ichiro Toda’s Synth1 software synthesizer.


Demo video for the Analog dream soundbank for Ichiro Toda’s Daichi labs Synth1 VSTi.

I hope you’ll enjoy those carfully crafted patches, and that you’ll have fun and that you’ll do great music with them :-)

It contains 128 sounds in various genres : leads, pads, basses, keys, FXs,…

The soundset is a free download.

The Analog Dream Soundbank Download size: 1.49 MB

More information: TNK Music

comment

Ichiro Toda updates Synth1 to v1.12

Related: , , , , Posted in news on May 26, 2010 - comment 0 comments
Ichiro Toda Synth1

Ichiro Toda has released version 1.12 of Synth1, a freeware virtual synthesizer plug-in for Windows.

Changes in Synth1 v1.12

  • External bank (ZIP file):
    • Now able to read ZIP file of compressed .sy1 files.
    • Now able to select it from the patch selection window of Synth1 only by putting the zip file on the external bank folder (default is “zipbank”).
    • Two or more folders can be included in one zip file with the hierarchy.
    • It is not possible to write it in an external bank. It is only for reading.
  • The preservation place of the set up information was changed from the Windows registry to the ini file:
    • The event that the set up information was not preserved on 64-bit OS or it was not possible to refer occurred.
    • Therefore, when the setting of existing Synth1 is succeeded, it is necessary to execute set succession tool (reg2ini.exe).
    • The ini file is “APPDATA\Daichi\Synth\synth1.ini”.
  • GUI:
    • The method of selecting the bank in the patch selection window corresponding an external bank was changed to the tree view form.
    • Memo (readme.txt) of each bank folder was confirmed and it preserved it in the patch selection window.
    • It was able to be set whether to use a transparent window on the patch selection screen etc. by an optional dialog.
  • Sound Engine: High-pass/Low-pass filter was added to Delay’s feedback loop.
  • BugFix: Problem that slider was displayed in LCD parts at setting that doesn’t use slider window.

Synth1 is available to download as a freeware VST instrument plug-in for Windows PC.

More information: Ichiro Toda / Synth1

comment

Ichiro Toda updates Synth1 to v1.11

Related: , , , , Posted in news on May 10, 2010 - comment 0 comments
Ichiro Toda Synth1

Ichiro Toda has released version 1.11 of Synth1, a free VST synthesizer instrument for Windows.

Changes in Synth1 v1.11

  • Sound Engine:
    • The sub oscillator was added:
      • The same pitch as oscillator1 or one octave under can be selected.
      • When OSC1 is eight multiple unison, the sub-oscillator becomes similar, too.
      • FM modulation also influences the sub-oscillator as well as OSC1.
      • The sub-oscillator doesn’t influence the AM modulation.
      • When the amount of the sub-oscillator is raised, the entire volume is automatically adjusted not to grow.
      • The wave pulse of the sub-oscillator always becomes a square wave regardless of a pulse width parameter.
    • The saw wave was changed from rising type to the descent type:
      • To operate the sub-oscillator effectively, it changed.
      • The amplitude value by 0 phases changed from 0 to +1.
    • The accuracy of the envelope of Amplifier has been improved.
    • The limiter algorithm of Filter is changed, and the noise has been improved only a little.
    • The performance of OSC1 at eight unisons has been improved a little.
  • System requirements:
    • It did not operate in CPU that did not support SSE2:
      • It seems to cause the expansion of the source code when keeping supporting it any further. To our regret, it was assumed operation off the subject.
      • The error message is displayed in the upper part of the panel when operating with CPU that doesn’t correspond, and the sound is not generated.
  • Small improvement and change of GUI:
    • A part of objection of the parameter name was corrected.
    • The patch selection window etc. were shut with the escape key.
  • Bug Fixes:
    • Problem of operation of sustaining pedal.
    • Problem that old FM setting value remained at voice trigger.
    • Problem that loudness at unison has changed in old version.
    • Problem that gain knob of Amplifier did not occasionally work.
    • Problem that patch change with program change spin button was not made good after it writes it in another bank.
    • Problem with thing that Synth1 window flickers according to environment.
    • Problem that position where parameter selection window etc. are displayed does clip to primary monitor in multi-monitor environment.

Synth1 is available to download as a freeware VST instrument plug-in for Windows PC.

More information: Ichiro Toda / Synth1

comment