Results for Ignite Amps

Below are the posts that should have something to do with 'Ignite Amps'.

Note: Use the search form in the top right if you're looking for something specific.

  

Ignite Amps releases NadIR convolver effect plug-in

Related: , , , , , , , Posted in news on Nov 25, 2013 - comment 0 comments

Ignite Amps has launched NadIR, a convolver cabinet simulation effect plug-in for Windows and Mac.

Ignite Amps NadIR
NadIR is a zero latency, dual Impulse Response (IR) convolver, designed to be used as a cabinet simulator for guitar & bass (pre)amplifiers (VST/AU or even hardware).

It has been designed to perform pristine quality convolution in real time, while being light on the CPU and easy to use, providing advanced built-in filters and delay controls to let guitarists and bassists shape their tone with ease, without the need to be professional audio engineers.

NadIR is meant to be used as a cabinet simulator for live playing and jamming, tracking or mixing inside hosts capable of VST or AU Plug-Ins support.

NadIR features

  • Zero Latency.
  • Low CPU usage.
  • Three routing modes: Mono, Dual Mono and Stereo.
  • Selectable quality control for max IR length (up to 0.185 seconds).
  • Automatic high-quality resampling for IRs with different sampling rates.
  • High-quality analog shaped filters.
  • Selectable delay for phase interactions between loaded IRs.
  • Continuous morphing control between loaded IRs.
  • Global input level and single IR level controls.
  • Fully automatable controls.

NadIR for Windows and Mac (VST/AU) is available to download as freeware.

More information: Ignite Amps / NadIR

comment

Ignite Amps releases TPA-1 tube amp plugin

Related: , , , , , , , , , Posted in news on Jul 19, 2013 - comment 0 comments
Ignite Amps TPA-1

Ignite Amps has released TPA-1, a digital emulation of a class AB tube power amplifier for guitar.

The TPA-1 is a digital emulation of a class AB tube power amplifier for guitar. It has been designed and developed to be paired with any guitar preamp (VST/AU or even hardware).

Its circuit is not based on any particular physical power amplifier, but it has been designed to have enough versatility to range from vintage to modern tones, letting the user be free to shape its dynamic behaviour with ease, without the need to be a tube amplifier tech.

Every single component on the signal path of the analog circuit has been taken into account and modeled in the best possible way to match the original sound as it was meant to be, while keeping an eye on CPU performances and real-time playability at the same time.

The TPA-1 is meant to be used as a guitar tube power amplifier simulator for live playing and jamming, tracking or mixing inside hosts capable of VST or AU Plug-Ins support.

TPA-1 for Windows and Mac (VST/AU) is available as freeware.

More information: Ignite Amps

comment

Ignite Amps updates NRR-1 tube preamp plugin to v2.0

Related: , , , , , Posted in news on Apr 19, 2013 - comment 0 comments
Ignite Amps NRR-1

Ignite Amps has updated its free NRR-1 custom 3 channels tube preamp effect plug-in to version 2.0.

NRR-1 is a digital emulation of a three channels tube preamplifier for guitar. It has been developed to accurately model its real harware counterpart, built for Fleshgod Apocalypse guitarist Cristiano Trionfera by Ignite Amps, back in 2009.

The NRR-1 core circuit is mainly based on a famous boutique preamplifier made in ’88, modded to suit Cristiano’s needs in the best possible way. It can deliver tones from jazzy clean, to blues or rock crunch, to modern bonecrushing metal rhythms and leads, with everything in between.

Changes in NRR-1 v2.0

  • Native x64 support for Windows/OSX (VST/AU).
  • New modeling engine for circuit simulation:
    • Improved math models stability and accuracy.
    • Improved dynamic and transient response for triode stages.
    • Improved frequency dependent triode/load interaction.
    • Increased filters complexity and accuracy for interstage circuits and tonestacks.
  • Changed VST ‘UniqueId’.
  • Reworked GUI.
  • Minor bugs fixed.

The NRR-1 plug-in for Windows and Mac (VST/AU) is a free download.

More information: Ignite Amps / NRR-1

comment

Ignite Amps releases TSB-1 Tyrant Screamer free overdrive plugin

Ignite Amps has released TSB-1 Tyrant Screamer, a freeware plug-in version of the custom overdrive stomp-box effect plugin built in collaboration with Benevolent.

Ignite Amps TBS-1
The TSB-1 “Tyrant Screamer” is a digital emulation of an overdrive pedal for guitar.

It has been developed to accurately model its real hardware counterpart, built for Benevolent guitarists Hadi Sarieddine and Mohammed Gad by Ignite Amps in 2012.

The TSB-1 core circuit is inspired by the most famous green “808” overdrive pedal, with additional features to increase its versatility and make it suitable for extremely down tuned guitars.

It can easily add dirt and bite to clean and overdriven guitar tones, as well as make the amplifier lead tone sound tighter, more focused and more responsive to picking, avoiding low-end muddiness and high-end fizz.

Every single component on the signal path of the real analog circuit has been taken into account and
modeled in the best possible way to match the original sound, keeping an eye to CPU performances and
real-time playability at the same time.

TSB-1 features

  • Dynamic 2N3904 Bipolar Junction Transistors stages analog modeling.
  • Dynamic 1N4148 diode circuit analog modeling.
  • Mono / Stereo processing support.
  • Selectable oversampling rate (up to 8x).
  • Variable Input Level control for better response to different pickups.
  • Double precision (64 bit) floating point internal processing.
  • Fully automatable controls.

TSB-1 Tyrant Screamer for Windows and Mac (VST/AU) is available to download at no cost.

More information: Ignite Amps / TSB-1 Tyrant Screamer

comment

Ignite Amps updates The Anvil tube preamp effect plugin to v2.0

Related: , , , , , , , , Posted in news on Feb 08, 2013 - comment 1 comment

Ignite Amps has released version 2.0 of The Anvil, a free custom tube preamp effect plug-in for Windows and Mac.

The Anvil is a digital emulation of a three channels tube preamplifier for guitar. It has been developed to accurately model its real hardware counterpart, designed by Andy Zeugs. The Anvil has three completely independent channels, with different signal paths and separate tonestack controls, to maximize its versatility.

Ignite Amps The Anvil
Ignite Amps The Anvil custom tube preamp (front & back panel).

Changes in The Anvil v2.0

  • Native x64 support for Windows/Mac (VST/AU).
  • New modeling engine for circuit simulation:
    • Improved math models stability and accuracy.
    • Improved dynamic and transient response for triode stages.
    • Improved frequency dependent triode/load interaction.
    • Increased filters complexity and accuracy for interstage circuits and tonestacks.
  • Changed VST ‘UniqueId’.
  • Minor GUI changes.
  • Minor bugs fixed.

The Anvil is a free download for Windows and Mac (VST/AU).

More information: Ignite Amps

comment

Ignite Amps releases PTEq-1a equalizer plugin

Ignite Amps has introduced its entry for the KVR Developer Challenge 2012, the PTEq-1a digital emulation of a famous Vintage Program Equalizer.

It has been developed to have all the characteristics of the original hardware, plus some additional features to increase it’s versatility.

Every single component on the signal path of the real analog circuit has been taken into account and modeled in the best possible way to match the original sound, keeping an eye to CPU performances and real-time playability at the same time.

Ignite Amps PTEq-1a
The Pultec inspired PREq-1a program equalizer by Ignite Amps.

PTEq-1a features

  • Three bands equalization with analog curve response.
  • Dynamic ECC88 / 6DJ8 SRPP tube stage analog modeling.
  • Additional selectable frequencies compared to the original design.
  • Mono / Stereo processing support.
  • Switchable Eq and Tube stage modeling for better CPU usage management.
  • Internal oversampling for aliasing reduction.
  • Variable Input and Output Level controls.
  • Double precision (64 bit) floating point internal processing.
  • Fully automatable controls.
  • Zero latency.

The PTEq-1a plug-in is available as a freeware effect plug-in for Windows and Mac (VST/AU).

More information: Ignite Amps PTEq-1a

comment

Ignite Amps releases SHB-1 free tube amplifier effect plugin

Related: , , , , , , , Posted in news on Jul 20, 2012 - comment 4 comments

Ignite Amps has announced the release of SHB-1, a digital emulation of a tube amplifier for bass.

It has been developed to accurately model its real harware counterpart, built for Subhuman bassist Federico Fulceri by Ignite Amps, in 2012.

From well fat and round tones for blues, to very tight and focused funky sounds, up to all out distorted, jackhammer-like poundings for modern metal, paired with the proper cab, the SHB-1 can cover them all and
then some. Every single component on the signal path of the real analog circuit has been took into account and modeled in the best possible way to match the original sound, keeping an eye to CPU performances and real-time playability at the same time.

Ignite Amps SHB-1
The SHB-1 is meant to be used as a bass amplifier for live playing and jamming, tracking or mixing inside hosts capable of VST or AU Plug-Ins support.

SHB-1 features

  • Dynamic 12AX7 / ECC83 coupled triode stages analog modeling.
  • Mono / Stereo processing support.
  • Selectable oversampling rate (up to 8x).
  • Global input / output level controls.
  • Double precision (64 bit) floating point mathematical model.
  • Fully automatable controls.
  • Zero latency.

The SHB-1 is available as a freeware effect plug-in for Windows and Mac (VST/AU).

More information: Ignite Amps

comment