Results for Inear Display

Below are the posts that should have something to do with 'Inear Display'.

Note: Use the search form in the top right if you're looking for something specific.

  

Glitchmachines updates Polygon sampler plugin to v1.1

Glitchmachines has released version 1.1 of Polygon, a sampler plugin designed to facilitate the creation of stunning composite sound effects.

Glitchmachines Polygon

Co-developed by Ivo Ivanov and Thomas Hennebert, Polygon was conceived from the ground up with unconventional attributes and a fast, forward-thinking workflow.

Layering samples is only the beginning. Polygon’s unique granular mode will bend your samples into fresh material while its clean and logical interface, extensive modulation options and distinctive sonic fingerprint make it an invaluable tool for creative sound design.

Changes in Polygon v1.1

  • New features:
    • new glide controls for each sampler as well as the sub oscillator + master glide offset.
    • new solo function for each sampler and the sub oscillator.
    • the effects processors can now be chained.
    • tooltips showing the current values of knobs/sliders upon mouse hover.
    • new waveform display with adaptive zooming to the current sample focus.
    • you can now drag & drop samples from the Finder/Explorer to the sample slots.
    • save a preset with copies of the samples used in a special folder for preset portability.
    • new option in the menu for opening the Finder/Explorer at the presets folder location.
    • UI refinements with improved contrast and new knob design.
    • knobs now have a distinct indicator if their parameters are targeted by a modulator.
    • new preset menu using columns for easier navigation.
    • new factory presets by Subjex.
  • Performance enhancements:
    • numerous refinements to reduce CPU load.
    • HQ mode: when de-activated can further reduce CPU load.
  • Bugfixes:
    • fixed : some parameters would not update properly at sample rates higher than 44.1kHz.
    • fixed : on preset change the sample folders paths (for file navigation using the arrows) would not update properly.
    • fixed : loop mode broken if focus set to 100%.
    • fixed : buttons and menus would capture the “Enter” key.
    • fixed : the stutter effect could get stuck looping a short click.
    • fixed : sample reverse misbehavior.

Polygon for Windows and Mac (VST/AU) is available to purchase for $49 USD.

More information: Glitchmachines / Polygon

comment

Glitchmachines releases Fracture free buffer effect plugin

Glitchmachines Fracture

Glitchmachines has announced the release of Fracture, a free buffer effect plugin geared toward creating robotic artifacts and abstract musical malfunctions.

Fracture features a buffer effect, a multimode filter, three LFOs and a delay.

This plugin is geared toward adding glitchy articulations and abstract textures to your projects. Use it on anything from drum and percussion loops to synth lines and sound effects.

Fracture’s intuitive interface and diverse features make it simple to give your projects a unique technical edge.

Fracture features

  • Buffer Effect.
  • 3 LFOs.
  • Multi-Mode Filter.
  • Delay Effect.
  • Presets by Ivo Ivanov & Thomas Hennebert.

The effect plug-in is available to download for Windows and Mac (VST/AU, 32/64-bit).

More information: Glitchmachines / Fracture

comment

Inear Display releases Rmpx4 multi-effect plugin

Related: , , , , , Posted in news on Jan 07, 2014 - comment 0 comments
Inear Display Rmpx4

Inear Display has launched Rmpx4, a multi effect processor focused on modulations.

Based around three classic effects (multimode filter, pitchshifter and delay), its aim is to generate evolving variations of the input audio by crossfading between two instances of each effect and modulating their key parameters using an extensive array of control modules.

4 LFOs with optional tempo sync and 2 envelope followers can have their output inverted or combined using mixers and multipliers. From subtle dub delays to mad glitch sequences, rmpx4 will help you generate complex variations of your original ideas.

Rmpx4 features

  • 2 filters with lowpass, highpass and bandpass modes.
  • 2 pitchshifters with buffer size and feedback settings.
  • 2 delay lines with tempo sync and time interpolation.
  • Crossfade control to morph between instances of each effect.
  • Mix controls for the pitchshifter and delay modules + global Dry/Wet control.
  • 4 LFOs with optional tempo sync.
  • 2 envelope followers.
  • 2 modulation signals inverters.
  • 2 modulation signals mixers.
  • 2 modulation signals multipliers.
  • Processed signal gain control.
  • Optional DC blocker in the output module.
  • Randomizer.
  • Panic button to clean the delay lines if needed.
  • MIDI Learn.
  • MIDI Program Change Support.
  • Vector based resizable user interface (Windows and OS X only).
  • Cross-platform presets.
  • 111 factory presets.
  • Lifetime free updates for registered customers.

The plugin is available to purchase at the introductory 50% discount for one week.

More information: Inear Display / Rmpx4

comment

Glitchmachines releases Polygon sound design oriented sampler plugin

Glitchmachines Polygon

Glitchmachines has announced the release of Polygon, a new sampler plugin designed to facilitate the creation of stunning composite sound effects.

Co-developed by Ivo Ivanov and Thomas Hennebert, Polygon was conceived from the ground up with unconventional attributes and a fast, forward-thinking workflow.

Layering samples is only the beginning. Polygon’s unique granular mode will bend your samples into fresh material while its clean and logical interface, extensive modulation options and distinctive sonic fingerprint make it an invaluable tool for creative sound design.

At the heart of Polygon, you will find 4 Sampler modules featuring a granular mode and various play and loop modes with focus and loop range sliders. The modules are supported by 8 LFOs, 4 modulation envelopes with variable slopes, two multi-mode filters, three effects processors, a sub oscillator and various global parameters. All of Polygon’s components work in conjunction with its modulation matrix to allow you to achieve extremely dynamic results with relative ease.

Polygon’s sound set was compiled to facilitate the broadest possible range of sonic flexibility. Its core is driven by a 1.2 GB sample library comprised of brand new material and previously unreleased alternate edits from our entire range of sound ware products. To get you started, we included factory presets from Ivo Ivanov, Thomas Hennebert, Nicholas Yochum and Daed. Load any of your existing samples and listen as Polygon takes things in exciting new directions.

Polygon features

  • 1.2 GB 24bit/96khz .wav sample library.
  • 4 monophonic Sampler Modules with Granular Mode.
  • Play & Loop modes with Range Sliders.
  • 4 Mod Envelopes with Cycle Mode and variable slopes.
  • 8 LFOs with Retrig, Sync and built-in Multipliers.
  • 3 FX Processors: Metalizer, Stutter and FM Ring Mod.
  • Sub Oscillator with Sine & Square wave with PWM.
  • Comprehensive Modulation Matrix and Global RND Isolate Suite.
  • Cross-platform compatibility (PC/Mac – VST/AU 32bit & 64bit).

Polygon is available to purchase for $49 USD.

More information: Glitchmachines / Polygon

comment

Inear Display releases BowEcho modular mangling delay

Related: , , , , , , Posted in news on Oct 01, 2013 - comment 0 comments
Inear Display BowEcho

Inear Display has released BowEcho, a modular delay effect plug-in for Windows.

BowEcho is a modular sound mangler based on 4 delay lines. It offers a large palette of sound design options thanks to 4 LFOs that can run at control or audio rate, 4 Mixers that can also act as gainers, basic filters, ringmodulators or stereo splitters, and the ability to route the output of each module the way you want. For example the LFOs can act as raw oscillators that can be used to ringmodulate the feedback path of a delay line. The delay times can be modulated over a wide range to generate noisy glitches or basic pitch­shifting of the input.

BowEcho is a versatile delay plugin that can adapt to your sonic needs : use it as a simple flanger with only one delay and one LFO, or go crazy and route all modules in absurd ways to produce creepy screaming drones.

BowEcho features

  • 4 delay lines with optional tempo sync.
  • 4 “mixers” that can also act as gainers, basic filters, ringmodulators and stereo splitters.
  • 4 LFOs with optional tempo sync and the ability to run at audio rate.
  • flexible modular routing.
  • MIDI learn.
  • MIDI program change support.
  • Vector based resizable user interface.
  • Cross-platform presets.
  • 62 factory presets by Ivo Ivanov, Daed, and Apparition.
  • Lifetime free updates for registered customers.

BowEcho for Windows and Mac (VST/AU) is available to purchase for the introductory price of 10 EUR until October 6th, 2013 (regular 20 EUR).

More information: Inear Display / BowEcho

comment

Inear Display releases Tkapik generative sampler plugin

Related: , , , , , Posted in news on Jul 30, 2013 - comment 0 comments
Inear Display Tkapik

Inear Display has announced Tkapik, an amplitude controlled generative sampler plug-in.

Add it to a track, then load a sound file and Tkapik will trigger the sample with random settings every time an amplitude peak is detected in the input signal.

The sample can either be mixed with the input according to its amplitude envelope or completely replace the signal using the “solo” mode.

Tkapik features

  • Sampler supporting wav and aiff audio files.
  • Sample triggering based on input signal amplitude.
  • Combine the sample and the input signal using the envelope follower.
  • Replace the input signal using the solo mode.
  • Random start offset, loop points and optionally pitch on every trigger.
  • User defined range for pitch random.
  • Sample reverse.
  • MIDI learn.
  • Vector based resizable user interface (Windows and Os X only).
  • Lifetime free updates for registered users.

Tkapik for Windows, Mac and Linux (VST/AU) is available to purchase for the introductory price of 10 EUR until August 3rd, 2013 (regular 20 EUR).

More information: Inear Display / Tkapik

comment

Inear Display releases Oxymore delay plugin

Related: , , , , , , Posted in news on May 02, 2013 - comment 0 comments

Inear Display has released Oxymore, a delay effect plug-in for Windows, Mac and Linux.

Inear Display Oxymore
Oxymore comes loaded with a comprehensive selection of presets from Ivo Ivanov and Daed.

Oxymore is a delay plugin with stutter, lowpass filter and modulation effects thrown in the feedback signal path. It can be used to generate classic delay effects as well as wild signal mutations.

The input signal first goes through a delay line on each stereo channel, but instead of sending directly the output back into the delay line, the resulting signal is sent to a stutter processor, then to a lowpass filter, and finally to another delay line on the opposite channel which is modulated for creating chorus type effects. The output of the second delay line is then routed back to the first one on the original channel.

The Oxymore plug-in for Windows, Mac and Linux (VST/AU) is available to purchase for the introductory price of 10 EUR until May 7th, 2013 (regular 20 EUR).

More information: Inear Display / Oxymore

comment

Inear Display updates Eurydice to v1.2

Related: , , , , , , Posted in news on Apr 22, 2013 - comment 0 comments
Inear Display Eurydice

Inear Display has released version 1.2 of Eurydice, a semi-modular sound mangling plugin focused on sound design.

The original Eurydice was based on two sound buffers, two multimode filters and two crushers. Starting with version 1.2, these blocks can now be combined in multiple ways thanks to the introduction of a patch panel that allows you to bend the signal path to your will.

Changes in Eurydice

  • Rewritten from scratch.
  • Linux native VST version (32 and 64 bit).
  • Patch panel allowing free audio/modulation routing.
  • 4 LFOs.
  • 4 signal mixers.
  • 2 signal multipliers.
  • “x 100? rate mode for the LFOs.
  • Master gain control.
  • Filter morph.
  • Independent mix control for the crushers.
  • Buffer sync helper.
  • Retrigger LFOs via MIDI.
  • New preset system and format (presets made with previous versions are not compatible).

Eurydice (VST/AU) is available to purchase for 20 EUR until April 29th, 2013 (regular 30 EUR).

More information: Inear Display / Eurydice

comment