Cableguys Curve 2

Results for KX77FREE

Below are the posts that should have something to do with 'KX77FREE'.

Note: Use the search form in the top right if you're looking for something specific.

  

KX77FREE updates Kx-PolyMod synth plugin to v1.52

Related: , , , , , Posted in news on Mar 29, 2013
KX77FREE Kx-PolyMod

KX77FREE has released version 1.52 of the Kx-PolyMod, a vintage modular polyphonic synthesizer plug-in with stereo SF2 player.

Changes in Kx-PolyMod v1.52

  • New SFO compatible with the PAN feature of SF2 banks.
  • New SSE2 SEM modules, up to 7% CPU won (min requirement >= Athlon K8 and P4).
  • Improvement of the loading of large SF2 banks.
  • Vcfs: possibility to replace the parameter “Master Cut” (F1 and F2) by a simple Cut off (F1).
  • Improvement of the Fx: new sources of modulation, new SV filter (2 to 4 poles), dry level added.
  • Filter Fx: now it is not necessary to set the resonance to half in LP mode to have a flat response curve.
  • Lfo: peak follower added to smooth the Sample and Hold signal.
  • Some automation names corrected.
  • All notes are stopped when the selectors “P Max” or “P Note” are modified
  • Fixed bug: The plug-in was overloaded when the distortion was oversampled if the sustain level, the release time of the Vca Eg were set to 0 and also when the Pan was on the left or on the right (too small signal level to the oversampled distortion).

Kx-PolyMod for Windows (VST) is available to download at no cost.

More information: KX77FREE / Kx-PolyMod

KX77FREE updates Kx-PolyMod to v1.5

Related: , , , , , Posted in news on Nov 14, 2012
KX77FREE Kx-PolyMod

KX77FREE has released version 1.5 of the Kx-PolyMod virtual synthesizer instrument for Windows.

Vintage modular polyphonic synthesizer with stereo SF2 player. To build analog 70′s leads!

Changes in Kx-PolyMod v1.5

  • Improved reset of the voices (filters and oscillators).
  • Levels of the harmonics before the cut off no longer decrease when the resonance is high (lp or bp, 18,12, 6).
  • A soft Tanh process has been implemented in some d* filters, the signal is modified by the Tanh process following the input level (produces less distortion).
  • Four SV filters (lp, hp, bp, notch) added with the possibility to adjust the number of poles of the slope (2 to 4, 12dB to 24 dB).
  • Two CS70M filters added (lp, hp), a special version of the SV filter with the same limits found in the tests: the cut off limited to 7040hz (9 volts) and the resonance level limited to 0.88.
  • GUI tool added: you can change the joystick background color to identify your plug-in if you have a session with many plug-ins used.
  • The internal help text has been modified to correct some errors and to update the test values.
  • The cut off of the MgL2 filter was false, the values used were not those of the oversampled filters. Fixed.
  • In some cases, the F1-F2 mix multiplied the stereo Vcf output by 0, causing abnormal CPU use. Fixed.

Kx-PolyMod for Windows (VST) is a free download.

More information: KX77FREE / Kx-PolyMod

KX77FREE releases Kx-PolyMod free modular synthesizer plugin

Related: , , , , Posted in news on Aug 09, 2012

KX77FREE has announced the release of Kx-PolyMod, a free virtual analog modular synthesizer instrument for Windows.

It is a new analog modular synthesizer with SF2 player, a mix between the Kxpm and the Kx-Synth-x16… I wanted to update the Kxpm23 but finally I built a new plug-in. 5 months of work! The presets are very vintage, include Mini and CS leads. A little drum set of 12 instruments in 24 bits (3.3 mo) is provided inside the setup or the zip.

KX77FREE Kx-PolyMod
Create the sounds of analog 70′s leads with the Kx-PolyMod synthesizer plugin.

Kx-PolyMod features

  • Stereo routing.
  • Up to 6 voices.
  • 15*12 Matrix controlled by 5*5 Sub matrix, include 4 Kxmod sources!
  • 5 Vcos with 5 waveforms, include the TriSaw, with Phase modulation and Sync (Vco1 only).
  • Oscillators 100% compatible with the Kx-Modulad’s waveforms (med, 498k).
  • 1 Stereo SF2 player (16 and 24 bits).
  • 1 SF2 drum set (24 bits, 12 samples, 3.3 Mo).
  • 4 Keyboard traking (-10 to 10) for the Vcos and the Vcfs.
  • 1 Ring Modulator with EQ.
  • 1 Noise Generator with EQ.
  • 1 Monophonic LFO with ADSR.
  • 2 Mulitmode VCFs (20) with oversampled processes.
  • 4 Polyphonic EGs with curves for each segment, velocity and Kbd controls.
  • 1 X Y joystick controller.
  • 1 Sample & Hold.
  • 10 host sync clocks.
  • 1 compressor.
  • 1 oversampled Distortion.
  • 1 Soft Vintage EQ.
  • 2 Delays with sync, multimode filter and modulation oscillator with sync.
  • 1 Scope with 10 ms of buffer size.
  • 1 Frequency display.
  • 1 Note pad.
  • Full Midi learn.
  • Internal Fxp and Fxb management.
  • 70 nice KX presets (70′s)!

The Kx-PolyMod is available as a freeware VST plugin for Windows.

More information: KX77FREE / Kx-PolyMod

KX77FREE updates Kx-Modulad to v2.3 & KX-SYNTH-X16 to v3.3

Related: , , , , , , Posted in news on May 02, 2011
KX77FREE Kx-Modulad

KX77FREE has released updates for Kx-Modulad and KX-SYNTH-X16, two free virtual synthesizer instruments for Windows.

Kx-Modulad is an analog modular synthesizer with stereo SF2 player and an additive synthesis WaveTracer to build high quality waveforms. 128 KX presets (70′s and 80′s).

KX-SYNTH-X16 is a vintage modular polyphonic synthesizer, based on the VCS3 structure.

Changes in Kx-Modulad v2.3

  • Vco2 improvement when it is synchronized by the Vco1 with the possibility to reduce the high frequencies modulations.
  • SF2 player improvement with the possibility to choice if the samples change following the pitch or not (Mod), useful for SF2 drum sets.
  • Fixed: Now the probability to have audio clicks at the end of no looped sf2 samples is very low, tested with various sf2 banks.
  • Fixed: The buffer size of the delays has been decreased to 5 sec to avoid a crash when the amount of the modulation is at max.

Changes in KX-SYNTH-X16 v3.3

  • Vco1 improvement when it is synchronized by the Vco2 with the possibility to reduce the high frequencies modulations.
  • Possibility to verify the Meter signal (all voices) before its ouput level and now the Meter output level is not linked with the Midi Prg Change.
  • The Vca knob controls the vca level when the Mod envelop is used to modulate the vca level.

Kx-Modulad to v2.3 and KX-SYNTH-X16 for Windows (VST) are available as freeware.

More information: KX77FREE

KX77FREE updates Kx-Modulad to v2.21 and Kx-Synth-X16 to v3.2

Related: , , , , Posted in news on Dec 15, 2010
KX77FREE Kx-Modulad

KX77FREE has released version 2.21 of Kx-Modulad, and version 3.2 of Kx-Synth-X16, two free synthesizer instruments for Windows.

Kx-Modulad is an analog modular synthesizer with stereo SF2 player and an additive synthesis WaveTracer to build high quality waveforms. 128 KX presets (70′s and 80′s).

Changes in Kx-Modulad v2.20/2.21

  • New classified presets.
  • Kx-Synth-x16′s LP12, LP 6 filters added.
  • Improvement of the Soft Sync (Vco2).
  • Internal presets management (fxb, fxp, copy, load, save).
  • Skin improvement: grey outlined and pop-up menus.
  • Power off to the Ring Modulator, Lfos, S&H, Noise and synchronized clocks.
  • Less CPU use in sleep mode.
  • Optimization of modulations to the Vcos, -15% of CPU use when all of them are used.
  • Less CPU use when the Prg Change works again.
  • The Fx decay did not stop during the Prg Change.
  • The filter selectors was alway on “R:LoM” (first preset).
  • Fixed bug: wrong Fx initialization in some case (2.20 bug).
KX77FREE KX-SYNTH-X16

Kx-Synth-X16 is a vintage modular polyphonic synthesizer, based on the the VCS3 structure.

Changes in Kx-Synth-X16 v3.2

  • Internal presets management (fxb, fxp, copy, load, save).
  • New parameter: “Mod” to use only one envelop.
  • Skin improvement with pop-up menus.
  • The synchronized clocks go in sleep mode when they are not used.
  • The envelop loop mode (“Lp”) could not be enabled when the envelop sustain.

Kx-Modulad and Kx-Synth-X16 for Windows (VST) are available to download at no cost.

More information: KX77FREE

KX77FREE Kx-Synth-x16, free synth plug-in updated to v3.10

Related: , , , , Posted in news on Aug 20, 2010
KX77FREE Kx-Synth-x16

KX77FREE has released version 3.10 Kx-Synth-x16, a free virtual vintage modular polyphonic synthesizer for Windows.

Changes in Kx-Synth-x16 v3.10

  • Possibility to use negative values with the mini knobs of the matrix (control inputs).
  • Hard synchro from the Vco2 to the Vco1.
  • New filters: LP 12 db, LP 6 db, with or without HP filter.
  • Possibility to use the Ring Modulator without its limiter and an EQ has been added on its output.
  • The input or output voltage values of the sequencer can be displayed in note values (eg: 5 volts = A3).
  • Fixed: The sequencer has been rewritten to avoid possible crash with Asio4all or similar asio drivers (samplerate update).
  • Fixed: The matrix crash test works again (all matrix pins on).

Kx-Synth-x16 is available to download as freeware VST instrument plug-in for Windows PC.

More information: KX77FREE

Top