Results for Noise Soft

Below are the posts that should have something to do with 'Noise Soft'.

Note: Use the search form in the top right if you're looking for something specific.

  

NoiseSoft releases Qu and Root Delay

Related: , , , , Posted in news on Nov 27, 2009 - comment 0 comments

NoiseSoft has released Qu and Root Delay, two effect plug-ins for Windows.

NoiseSoft Qu

Qu is a quad filter effect.

The Qu consists of four separate “all band” filters with five separate controls for each channel (A to D). The individual tuning of our custom filters produces audio illusions and phenomena that can not be found anywhere else; phase and frequency based stereo panning controls mean that a user can dial in effects that contrast across the whole audio spectrum, especially when used with track envelopes within the host workstation.

Qu features

  • VOLUME: This controls the master volume. Lowest setting is silence and highest setting the maximum output.
  • MIX: Controls the mix quantity of all filter sections.
  • PITCH (A/B/C/D): Adjusts the affected pitch of each individual filter section from low drones to bell-like high pitched ringing.
  • RESONANCE (A/B/C/D): Adjusts the resonance of each filter, from minimal effect to extreme phase shifting and everything between.
  • FREQ (A/B/C/D): The frequency control for each filter has custom coded extreme frequency shifting, capable of lo-fi filtering in the low knob settings, all the way to harsh industrial/glitch effects.
  • LEFT and RIGHT (A/B/C/D): These are separate controls for left and right phase shifting.
NoiseSoft Root Delay

Root Delay is an echo / delay effect.

The Root Delay is designed for creating dub style echo and filter sweeps as well as other delay effects found in all kinds of modern electronic music. The effect features a delay section with separate adjustable controls for left and right time settings and also a filter section with controls for sweep rate and depth. The delay and filter combination produces everything from granular glitch / idm style processing to sweeping dub style echos and slap back effects.

Root Delay features

  • LEFT and RIGHT: These are separate controls for left and right echo / delay times (milliseconds from 0ms to 10ms).
  • FEEDBACK: knob is for controlling the amount of echos you would like. From 1 to (almost) infinity.
  • RES knob: Adjusts the resonance of the filter, from minimal effect to drone sound and everything between.
  • CUT: Adjusts the filter cutoff. From very metallic to very (sub)bassy.
  • RATE: Adjusts the sweep rate of the filter, from about a minute to pseudo granular.
  • DEPTH: Adjusts the depth of the filter effect. From light filtering to very dramatic sweeps.
  • WET: Controls the volume of the delay and filter effects combined.
  • DRY: Controls the volume of the dry signal.

Qu and Root Delay are available as VST effect plug-ins for Windows PC, priced at $14 USD each.

More information: NoiseSoft / Qu / Root Delay

NoiseSoft releases The Reductionist

Related: , , , , , Posted in news on Nov 16, 2009 - comment 0 comments
NoiseSoft The Reductionist

NoiseSoft has released The Reductionist, a free Lofi / Bit Crush effect plug-in for Windows.

An experimental VST effect plug in, lo-fi / bit crush with a single knob designed to downgrade and crush your audio.

Single knob design:
- CRUSH: Lowest setting is distorted / overloaded and bit-rate reduced, highest setting is enhanced lo-fi distortion. A very experimental toy to play around with alone, or in combination with other effects.

The Reductionist is available as a freeware VST effect plug-in for Windows PC.

NoiseSoft / The Reductionist

Noise Soft releases Break Filter

Noise Soft Break Filter

Noise Soft has released Break Filter, an industrial / breakcore filter effect plug-in for Windows.

Custom stereo “all band” filter effect (windows/vst) with noise based distortion can take your sound from natural gain to frequency and phase shifted chaos.

Break Filter features

  • Gain — Lowest setting is pure bypass and highest setting is extreme distortion, almost to the point of white noise. *The filter also works great even when the distortion GAIN knob is set to “0″ or bypass.
  • Pitch — Adjusts the affected pitch of the filter from low bassy drones to high pitched ringing.
  • Resonance — Adjusts the resonance of the filter, from minimal effect to drone sound and everything between.
  • Freq — The frequency control for the filter has custom coded extreme frequency shifting, capable of lo-fi filtering in the low knob settings, all the way to harsh industrial/punk effects.
  • Left and Right — These are separate controls for left and right phase shifting. These control panning for the different layers of our complex resonant filter layers.

Break Filter is available as a VST effect plug-in for Windows PC for $29 USD. The first 400 customers will get an additional 400+ loops (321 Mb) with their purchase.

More information: Noise Soft / Break Filter