OverTone DSP has announced the release of AF2-10, a graphical EQ effect plug-in for Windows, Mac and Linux.
OverTone DSP has released the AF2-10 analogue filter modelling graphical EQ for Windows, Mac OS X and Linux.
The plug-in provides up to ten EQ bands, covering a comprehensive range of filter types across the full 20Hz to 20kHz audio range together with a real-time FFT display featuring optional pre / post EQ monitoring and selectable slope compensation.
Innovative filter algorithms accurately model the natural response of analogue designs, even at close to the limit imposed by the sample rate, without requiring CPU intensive or latency inducing techniques.
- Analogue Filter Modelling — Accurately models the natural response of analogue filters even at close to the limit imposed by the sample rate, without requiring CPU intensive techniques.
- Comprehensive selection of filter types
- Peak Filters – 5 types with varying gain / Q interaction.
- LF and HF Shelf with adjustable resonance.
- Lowpass with adjustable resonance.
- Highpass with adjustable resonance.
- Realtime FFT display — Sample synchronous realtime display of harmonic content.
- Selectable FFT slope compensation (3dB / oct).
- Pre / Post EQ monitoring.
- Zoomable display — Zoom the EQ / FFT display up to 2X in realtime for extra precision.
AF2-10 is available for Windows, Mac OS X and Linux (VST) for the introductory price of $22.50 USD/22.50 EUR/£22.50 GBP) until January, 2015. Mac versions are VST only at this time, Audio Units will be available soon as a free addition.
More information: OverTone DSP / AF2-10
OverTone DSP has introduced RVB500, a stereo plate reverb effect plug-in, capable of a rich variety of effects, with intuitive controls and low demands on CPU and system resources.
Complex convolution reverb models can be an asset for replicating physical spaces, but can also be resource hungry, leaving less processor power available for other plug-ins or requiring costly hardware add-ons.
By contrast, the RVB500 algorithmically emulates a mechanical plate reverb, still regarded as a mainstay of many recording studios, for a diverse range of effects including drum enhancement or vocal ambience.
Economical with system resources, the RVB500 is ideal for classic reverb effects while leaving sufficient power available for the most complex DAW projects.
- Adjustable sub-sample resolution pre-delay and RT60 decay time settings.
- Variable HF Damping.
- Plate reverb emulation with virtual transducer drive and receiver amplifiers.
- Wet-Only mode for use on a dedicated ‘reverb buss’.
- DPI-aware GUI automatically upscales for resolutions greater than 96dpi, improving usability on small / hi-resolution screens.
- Physical Control Weighting replicates the feel of high quality rotary controls, also improving accuracy for small control changes.
RVB500 for Windows, Mac and Linux (VST/AU) is available for the introductory price of 19.50 EUR through October, 2014 (25% off regular).
More information: OverTone DSP / RVB500
OverTone DSP has released DYN4000, a channel compressor/expander/gate plug-in for Windows and Mac.
Based on channel dynamics processing from one of the best-known British recording consoles, the DYN4000 comprises compressor / limiter and expander / gate sections.
The plug-in includes a true RMS side-chain detector, while the compressor provides a switchable soft / hard knee characteristic, ensuring smooth onset of compression at the threshold point or more aggressive dynamics control on demand.
Switchable compressor fast attack settings are also provided as is variable programme dependent release while the expander / gate section provides a 1:2 downward expander or a 1:∞ gate setting with threshold hysteresis.
DYN4000 for Windows and Mac (VST/AU) is available for purchase for £20 GBP.
More information: Overtone DSP / DYN4000
OverTone DSP announced the release of the Vintage Mastering Bundle, comprising the FC70 Fairchild 670 Limiter and PTC-2A Vintage Pultec EQ plug-ins for Windows and Mac OS X.
The PTC-2A is a superb emulation of the legendary Pultec EQP-1A, one of the most sought-after vintage equalizers. Separate LF Boost and Attenuate controls provide the signature Pultec sounds, while, as in the original hardware, a transformer-coupled tube amplifier stage further enhances the vintage qualities. Innovative filter technology provides a genuine analogue response without requiring conventional CPU-intensive techniques.
The FC70 emulates the legendary smooth, effortless dynamic control and uniquely musical character of the classic Fairchild 670 limiter. Modelled using measured data and schematics from genuine hardware, the FC70 uses a fully balanced design, combined with innovative delay-free feedback topology to emulate the original circuitry. The sidechain includes the fast attack and program dependent release settings of the original, combined with Lateral / Vertical, Independent and Linked stereo channel modes.
The bundle is available or purchase for the introductory price of £25 GBP until July 31st, 2013 (30% off individual prices).
More information: OverTone DSP / Vintage Mastering Bundle
OverTone DSP has released the PTH-2A program equalizer plug-in for Mac OS X and Windows.
The PTH-2A vintage Pultec style equalizer effect plugin.
Based on the Pultec EQH, the PTH-2A similarly provides a cost-effective subset of features found on the popular PTC-2A / EQP-1 emulation, at a significantly reduced price.
Using the same filter technology and separate low frequency boost and attenuate controls to replicate the signature Pultec low-end sounds, the PTH-2A also includes a transformer-coupled tube amplifier emulation which further enhances the vintage qualities.
The PTH-2A for Windows and Mac (VST/AU) is available to purchase for £15 GBP.
More information: Overtone DSP / PTH-2A
OverToneDSP has announced the release of the PTC-2A equalizer effect plugin for Mac. Modelled on the classic Pultec EQP-1A, the PTC-2A features separate LF Boost and Attenuate controls, a transformer-coupled valve amplifier emulation and the … read more
OverTone DSP has released the EQ500 and DYN500 effect plug-ins for Windows. Styled as virtual API-500 format modules, the 500-Series bundle includes the EQ500 and DYN500, channel EQ and dynamics VST plugins. The DYN500 provides … read more
OverTone DSP has released the PTC-2A, an equalizer effect plug-in for Windows. Inspired by the classic Pultec EQs and modelled using measured data and schematics from real hardware, using algorithms originally developed for the linuxDSP … read more