Results for SoniqWare

Below are the posts that should have something to do with 'SoniqWare'.

Note: Use the search form in the top right if you're looking for something specific.

  

SoniqWare releases picoSeries effect plugins (+ AU/VST3 formats)

Related: , , , , , Posted in news on May 22, 2012 - comment 0 comments
SoniqWare picoSeries

SoniqWare has announced the picoSeries, a series of effect plugins designed with simplicity in mind.

SoniqWare releases picoSeries, a range of plugins designed for maximal simplicity of use while embedding the advanced SoniqWare sound processing algorithms: picoQuiet (noise reduction), picoEdge (attack transient processing), picoTail (release transient processing).

picoSeries features

  • Single knob operation… plus a few a knobs we really could not manage to drop
  • Currently three plugins:
    • picoQuiet noise reduction
    • picoEdge attack transient processing
    • picoTail rlease transient processing
    • … more plugins to come… stay tuned…
  • Supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz.
  • Stereo operation.
  • VST automation of all parameters.
  • Silent controls.
  • Use of SSE1-SSE5 instruction sets.

The picoSeries plug-ins are available to purchase for Windows and Mac (VST/AU), priced at 34 EUR / $44 USD each.

SoniqWare has also updated its MT-1 Multiband Transient Processor, SG-1 Spectral Noise Gate, and PE-1 Linear Phase Parametric Equalizer with various minor fixes and improvements and the release of AU and VST3 versions.

More information: SoniqWare / picoSeries

comment

SoniqWare T3 (Time To Trigger) MIDI trigger plug-in

Related: , , , , Posted in news on Nov 02, 2011 - comment 0 comments
SoniqWare T3 Time To Trigger

SoniqWare has released T3 (Time To Trigger), a MIDI trigger plug-in for Windows and Mac.

SoniqWare releases T3 (Time To Trigger), a stereo MIDI trigger engine that listen to incoming audio, detects new events, and sends MIDI notes with appropriate dynamics and pan to control a drum sampler or any other synthesizer, all this live. To be used for drum replacement or synthesizer control through audio, in combination with any plug-in or external synthesizer.

T3 features

  • Fast and accurate detection engine
  • Pinpoint frequency band used for detection using low-pass and high-pass filters
  • Control both detection sensitivity and detection loudness threshold
  • Adjustable guard to avoid faulty double triggering
  • Percussive trigger mode, to be used for instance for drum replacement
  • Sustained trigger mode, where sustained sound generate sustained MIDI notes
  • MIDI channel, program, and note control
  • Continuously adjustable dynamics curve, linear and non-linear
  • Velocity and pan captured from the input signal
  • Velocity tracking in sustained mode: expressive changes in the loudness will generate appropriate MIDI expression messages
  • Pan tracking in sustained mode: a left-right panned input audio will generate a left-right panned MIDI note
  • Graphical display: signal loudness and internal detection signal
  • L/R vu-meter with hold peak and clip readouts
  • Supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz
  • Stereo operation
  • Load/save programs and banks
  • VST automation of all parameters
  • Silent controls
  • Use of SSE1-SSE5 instruction sets

T3 for Windows and Mac (VST) is available to purchase for 99 EUR.

More information: SoniqWare / T3 (Time To Trigger)

comment

SoniqWare updates SG-1 Noise Reduction / Spectral Noise Gate to v1.2

Related: , , , , , Posted in news on Sep 20, 2010 - comment 0 comments
SoniqWare SG-1

SoniqWare has released version 1.2 of SG-1 Noise Reduction / Spectral Noise Gate, an effect plug-in for Windows and Mac.

SoniqWare SG-1 is a professional stereo spectral noise gate packed with high-end features that you will find very useful for most noise reduction needs, including hum, hiss, vinyl, tape, or background noise reduction.

Changes in SG-1 v1.2

  • Redesigned to provide various noise tracking and reduction algorithms.
  • Introduced automatic online noise tracking algorithm that can adapt to changing noise conditions.
  • Introduced new noise reduction algorithm with improved transient preservation and improved noise reduction with minimal artifacts.
  • Fixed issues with noise profile initialization.
  • Fixed issues that could create glitches and artifacts for some signals.

SoniqWare SG-1 is available to purchase as a VST effect plug-in for Windows and Mac, priced at 119 EUR.

More information: SoniqWare / SG-1

comment

SoniqWare releases MT-1, SG-1, and PE-1 VST for Mac

Related: , , , , , , Posted in news on Apr 12, 2010 - comment 0 comments
SoniqWare

SoniqWare has announced that its VST plug-ins are now available for both Windows XP/Vista/7 and Mac OS X 10.5/1.6 Intel.

SoniqWare Plug-Ins

  • MT-1 Multiband Transient Processor
    • Increase or decrease the impact of percussive sounds.
    • Lengthen or shorten the decay or reverberation.
    • Multiband design means tremendous versatility.
    • Quickly set the overall effect with Link button on.
    • Apply finer adjustments of each individual band.
    • Linear phase adjustable crossover filters.
    • Fast detectors.
    • Controls for both attack and release.
    • Graphical display: crossover filters and make-up gains.
    • Load and save programs and banks.
    • Two channels (stereo and M/S encoding).
    • Wide range of supported sample rates.
  • SG-1 Spectral Noise Reduction / Noise Gate
    • Capture noise profile from audio data.
    • Adjust using noise profile parametric EQ.
    • Graphical display and edition of EQ.
    • Knee, attack, release, resolution controls.
    • Load and save programs and banks.
    • Two channels (stereo).
    • Wide range of supported sample rates.
  • PE-1 Linear Phase Parametric EQ
    • Seven bands parametric equalizer.
    • Five linear-phase filter types: bell, low-shelf, high-shelf, low-pass, and high-pass.
    • Fully decramped high-frequency response (analog-like).
    • Graphical edition of response.
    • Innovative shape controls for tonal shaping: hyper-parametric approach.
    • Supports host automation.
    • Load and save programs and banks.
    • Two channels (stereo).
    • Wide range of supported sample rates.

SoniqWare MT-1 is now available to purchase for $199 USD / 159 EUR, SG-1 and PE-1 are $149 USD / 119 EUR each.

More information: SoniqWare

comment

SoniqWare releases MT-1

Related: , , , Posted in news on Aug 20, 2009 - comment 0 comments
SoniqWare MT-1

SoniqWare has announced the release of MT-1, a multiband transient processor for Windows.

With MT-1, you will be able to modify the attack and release content of most sounds, using settings that can be adjusted individually in four frequency bands.

MT-1 multiband behavior is obtained using three low-latency linear-phase perfect reconstruction crossover filters. These filters have adjustable slopes and their cutoff frequencies can be tuned on a wide frequency range. Each of the four signals is then routed to its own individual transient processor. These make use of very fast detection algorithms, and provide attack time and gain controls, release time and gain controls, as well as a make-up gain.

MT-1 Multiband Transient Processor features

  • Multiband transient processor.
  • Linear-phase crossover filters.
  • Fast detectors.
  • Attack and release transient processors.
  • Crossover slopes: 12 dB/oct, 24 dB/oct or 48 dB/oct.
  • Crossover cutoffs: 200 to 20000 Hz.
  • Attack time: 1 to 100 ms.
  • Attack gain: -12 to 12 dB.
  • Release time: 10 to 1000 ms.
  • Release gain: -12 to 12 dB.
  • Solo button for each band.
  • Link button for tying controls.
  • Graphical display: crossover filters and make-up gains.
  • l/R vu-meter with hold peak and clip readouts.
  • Supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz.
  • Stereo operation: L/R, L only, R only, M/S, M only, S only.
  • Load/save programs and banks.
  • vST automation of all parameters.
  • Silent controls.
  • Use of SSE/SSE2 instructions.

MT-1 is available as a VST effect plug-in for Windows PC for 159 EUR.

More information: SoniqWare

comment

SoniqWare releases SG-1

Related: , , , , , Posted in news on Mar 10, 2009 - comment 0 comments
SoniqWare SG-1

SoniqWare has released SG-1, a stereo spectral noise gate with parametric control over noise profile, spectral resolution control and graphical editor for Windows PC.

Parametric Control over Noise Profile: Capture the noise profile from your material and adjust it using the three bands parametric equalizer. Alternatively, create a noise profile from scratch using the bias, slope and eq controls.

Spectral Noise Gate Control: Tune the noise gate parameters, including the knee, the reduction amount, as well as the attack and release times. The spectral resolution can be adjusted in a continuous fashion, ranging from single band processing to very high spectral resolution.

Interactive Graphical Display: Visualize the stereo input and output signals spectral content, as well as the shape of the stereo noise profile. Besides, the noise profile parametric eq is controled using the display handles, and the corrected profile instantly appears on the display.

SG-1 Spectral Noise Gate features

  • spectral noise gate / noise reduction
  • capture noise profile from audio data
  • noise profile parametric eq: bias, slope, one low-shelf and two bell filters
  • design noise profile from scratch
  • noise reduction control range: 0 to 48dB
  • gate knee control range: from hard to soft knee
  • attack control range: 1 to 100 ms
  • release control range: 10 to 1000 ms
  • spectral resolution control range: from single band to high spectral resolution
  • graphical display: input, profile and output signal spectra
  • graphical edition of noise profile parametric eq using colored handles
  • L/R vu-meter with hold peak and clip readouts
  • supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz
  • stereo operation
  • load/save programs and banks, including noise profiles
  • VST automation of all parameters
  • silent controls
  • use of SSE/SSE2 instructions

SoniqWare SG-1 is available as a VST effect plug-in for Windows PC for $199 USD/159 EUR.

Visit SoniqWare for more information.

comment

SoniqWare updates PE-1 to v1.1

Related: , , , Posted in news on Jan 19, 2009 - comment 0 comments
SoniqWare PE-1

SoniqWare has released version 1.1 of PE-1, a versatile seven bands stereo linear phase parametric equalizer with fully decramped analog-like frequency response, graphical editor, and unique shape controls.

Changes in PE-1

  • Fixed several issues on some hosts:
    • Clicks or scrambled audio could be heard when stop playing.
    • The host was not notified of parameter changes when pushing the ‘paste’ button of PE-1.
  • Fixed several issues when using SONAR (6, 7 and 8):
    • Graphical editor was freezing after hitting pause or stop.
    • Clicks or scrambled audio could be heard at the end of loop in loop mode.
    • Right vu-meter was showing 0dB on a single channel signal when ‘enable mono processing’ was set.
  • Fixed issue when using CUBASE (4.0 and 4.5):
    • Software activation would not work in some cases on Windows Vista.
  • Improved CPU usage when moving display handles and knobs.

SoniqWare PE-1 is available as a VST effect plug-in for Windows PC for $199 USD / 159 EUR.

Visit SoniqWare for more information.

comment