Tention Digital Audio has released TDAi XQ Crusher, a freeware VST plug-in made with SynthMaker.
Features
- 1 Oscillator with 5 Waveforms
- Vibrato (0.1-100Hz)
- Phase-Modulation with 3 Shapes and 3 Directions
- Frequency-Modulation
- ADSR Envelope (VCA)
- ADSR Envelope (VCF)
- Multipass Filter
- Chorus
- 8-Band EQ
- Master-Section with Clipping
- Support for 32 presets each bank
Note: TDA plug-ins need a CPU that supports SSE/SSE2.
Visit TDA for more information and a link to download TDAi XQ Crusher.
Tention Digital Audio has released 2 new effect plug-ins: TDAe EQ2032, a 32 band equalizer plugin and DT424, a distortion plug-in.
Both plug-ins have been created with Synthmaker and are available for free.
TDAe EQ2032 Features
- 32-Band Equalizer from 16Hz to 20kHz
- +/-20dB range each band
- Dry/Wet mix and output gain controls
TDAe DT424 Features
- separate Low and Highfrequency distortion
- pre-gain, threshold and post-gain distortion controls
- 4-Band equalizer for additional sound control
- output amplifier
Visit TDA for more information and links to download EQ2032 and DT424.
Tention Digital Audio has another VST effect plug-in. TDAe FD Stereo is a step-controlled Stereo Filter Delay.
This guy has been quite busy lately and these little freebies seem to get better and better.
Features
- Step-controlled Delay (1-16)
- Feedback control
- Separate controls for each stereo channel
- Dry/Wet control
- Delayfilter cutoff and resonance
- Adjustable Lowpass/Bandpass mix
Visit Tention Digital Audio for more information and a link to download TDAe FD Stereo.
Tention Digital Audio has released TDAi XR ONE, a freeware synth created with SynthMaker.
Features
- 2 Oscillators with 16 Waveforms
- Detuning for both Oscillators (Spreading)
- VCA & VCF ADSR envelopes
- Multipass Filter
- Master-Section with Clipping
Visit TDA for more information and a link to download TDAi XR ONE.
Tention Digital Audio has released TDA MP5D, a freeware Multipass Filter VST plug-in.
Features
- Multipass Filter for LP, HP, BP, Notch and Peaking
- LFO for Cutoff with a max. speed of 2Hz
- LFO for Resonance with a max. speed of 2Hz
- Master-Section with Clipping
The LFO Depth set is calculated by the settings for Cutoff/Resonance and will have a maximum range of the value between the Cutoff/Resonance settings and the highest (if higher than 50%) or the lowest (if lower than 50%) value, so that the LFO spins around the set value for Cutoff/Resonance.
An Example: If is set a Cutoff value of 75% and the Cutoff LFO-depth is set to 100%, the LFO will spin the cutoff between 50% and 100% with the set value for LFO-speed. That means, that a set value for Cutoff/Resonance of 0% or 100% will not affect a LFO modulation.
Check TDA‘s website for more information and a link to download the latest version of TDA MP5D VST.
TDA has released yet another freeware VSTi, TDAi XS404 BETA.
This one is simular to the XS401, but features 3 Saw Oscillators instead of 2.
Features
- 3 Saw Oscillators
- ADSR Envelope (VCA) each Oscillator
- ADSR Envelope (VCF) each Oscillator
- Multipass Filter each Oscillator
- Global Multipass Filter with LFOs
- Master-Section with Clipping
TDA’s synths are created with SynthMaker and look pretty sweet. Has anyone tried one of these synths? If so, how is the CPU on these synths?
Visit TDA for more information and a link to download TDAi XS404 BETA.
