Results for KX77FREE

Below are the posts that should have something to do with 'KX77FREE'.

Note: Use the search form in the top right if you're looking for something specific.

  

KX77FREE updates Kx-Modulad to v2.21 and Kx-Synth-X16 to v3.2

Related: , , , , Posted in news on Dec 15, 2010 - comment 0 comments
KX77FREE Kx-Modulad

KX77FREE has released version 2.21 of Kx-Modulad, and version 3.2 of Kx-Synth-X16, two free synthesizer instruments for Windows.

Kx-Modulad is an analog modular synthesizer with stereo SF2 player and an additive synthesis WaveTracer to build high quality waveforms. 128 KX presets (70′s and 80′s).

Changes in Kx-Modulad v2.20/2.21

  • New classified presets.
  • Kx-Synth-x16′s LP12, LP 6 filters added.
  • Improvement of the Soft Sync (Vco2).
  • Internal presets management (fxb, fxp, copy, load, save).
  • Skin improvement: grey outlined and pop-up menus.
  • Power off to the Ring Modulator, Lfos, S&H, Noise and synchronized clocks.
  • Less CPU use in sleep mode.
  • Optimization of modulations to the Vcos, -15% of CPU use when all of them are used.
  • Less CPU use when the Prg Change works again.
  • The Fx decay did not stop during the Prg Change.
  • The filter selectors was alway on “R:LoM” (first preset).
  • Fixed bug: wrong Fx initialization in some case (2.20 bug).
KX77FREE KX-SYNTH-X16

Kx-Synth-X16 is a vintage modular polyphonic synthesizer, based on the the VCS3 structure.

Changes in Kx-Synth-X16 v3.2

  • Internal presets management (fxb, fxp, copy, load, save).
  • New parameter: “Mod” to use only one envelop.
  • Skin improvement with pop-up menus.
  • The synchronized clocks go in sleep mode when they are not used.
  • The envelop loop mode (“Lp”) could not be enabled when the envelop sustain.

Kx-Modulad and Kx-Synth-X16 for Windows (VST) are available to download at no cost.

More information: KX77FREE

comment

KX77FREE Kx-Synth-x16, free synth plug-in updated to v3.10

Related: , , , , Posted in news on Aug 20, 2010 - comment 0 comments
KX77FREE Kx-Synth-x16

KX77FREE has released version 3.10 Kx-Synth-x16, a free virtual vintage modular polyphonic synthesizer for Windows.

Changes in Kx-Synth-x16 v3.10

  • Possibility to use negative values with the mini knobs of the matrix (control inputs).
  • Hard synchro from the Vco2 to the Vco1.
  • New filters: LP 12 db, LP 6 db, with or without HP filter.
  • Possibility to use the Ring Modulator without its limiter and an EQ has been added on its output.
  • The input or output voltage values of the sequencer can be displayed in note values (eg: 5 volts = A3).
  • Fixed: The sequencer has been rewritten to avoid possible crash with Asio4all or similar asio drivers (samplerate update).
  • Fixed: The matrix crash test works again (all matrix pins on).

Kx-Synth-x16 is available to download as freeware VST instrument plug-in for Windows PC.

More information: KX77FREE

comment

KX77FREE Kx-Synth-x16 and Kx-Modulad, freeware synths updated

Related: , , , , , Posted in news on Jul 12, 2010 - comment 0 comments

KX77FREE has released version 3.0 of virtual vintage modular polyphonic synthesizer Kx-Synth-x16, and version 2.1 of Kx-Modulad, an analog modular synthesizer with stereo SF2 player and an additive synthesis.

KX77FREE Kx-Synth-x16 and Kx-Modulad
KX77FREE Kx-Synth-x16 and Kx-Modulad freeware synthesizer plug-ins

Changes in Kx-Synth-x16 v3.0

  • KX77FREE oscillators replace the native SE oscillators (tweaked with a lot of modules). The result is -40% of CPU use won (-33% up to -50%).
  • The waveforms have been modeled by using additive synthesis (Wavetracer v2.0). This technology produces waveforms like the original analog waveforms, the timbre and the shape can be identical or very close.
  • Kx-Synth-x16 oscillators are 100% compatible with the Kx-Modulad waveforms. These waveforms are available on http://kx77free.free.fr.
  • New parameters: “G Vcos” to put all vcos in phase to do fatty bass sounding.
  • New LFO parameters, the AUX envelop can control the LFO speed and its amount to the LFO level is now independent of the main AUX envelop level used to the matrix.
  • Midi input channel selector added.
  • All the Midi learn parameters are set to “none”, you start with a blank Midi learn setting.
  • All banks in version 2.5 are compatible with those of version 3.0. This new version keeps the same vst index (ID) of the version 2.5 in order to preserve the compatibility of the presets between the two versions.
  • Fixed: If a negative value of velocity modulated the release of the VCA envelope, the VCA output level could be completely saturated.
  • Fixed: A bug in Cubase 5 is avoided by changing only the first letters of the name of the plug-in. Indeed if two VSTs have the same ID and have theirs names beginning with the same letters Cubase 5 shows only one in its list of VSTs. If you want to keep the KX-SYNTH-X16-V25, the plug-in V3-KX-SYNTH-X16 will work fine and will appear in the VSTs list of Cubase 5.

Changes in Kx-Modulad v2.1

  • Wavetracer v2.0: all VCS3 waveforms was done with this new version!
  • Help texts for all Wavetracer parameters.
  • 13 new waveforms are available.
  • All the Midi learn parameters are set to “none”, you start with a blank Midi learn setting.
  • Fixed bugs: the Midi Learn channel was selected alway to “All” and the Aftertouch destinations was wrong.

Kx-Synth-x16 and Kx-Modulad are available to download as freeware VST instrument plug-ins for Windows PC.

More information: KX77FREE

comment

KX77FREE updates KX-Synth-X16 to v2.5

Related: , , , , Posted in news on Feb 22, 2010 - comment 0 comments

KX77FREE has released version 2.5 of KX-Synth-X16, a free virtual modular synthesizer plug-in for Windows based on the VCS3.

KX77FREE KX-Synth-X16
KX-Synth-X16, virtual analog synth based on the VCS3 structure

Changes in KX-Synth-X16 v2.5

  • New features:
    • Full Midi Learn.
    • Frequency displays on the main panel.
    • Note transposition for each oscillator.
    • Bar synchro to any step of the sequencer (1 to 16).
    • Bend selector for the synthesizer.
    • Midi out on/off.
    • 21 new presets.
  • Improvements:
    • All automation names rewritten.
    • The sequencer files are in the plug-in folder.
    • Initialization time of 2 sec.
    • Less cpu use, no mute and initialization during the Prg Ch.
    • Mini knobs to control directly the joystick with Midi controllers.
    • New internal structure with less modules and connections.
    • The input level of the Fx is controlled by the Run AR to smooth the signal when the FX are used directly .
    • The destinations Vca, Ring a, Ring B and Fx go to the sleep mode if any pins are not connected in theirs columns.
    • Midi out: the Prg Ch is filtered and better management of the CC123.
  • Bugs fixed:
    • The transposition of the sequencer CV to the matrix was wrong.
    • The Mod signal of the voice n°6 was rectified and always positive.
    • If the loop ( Lp ) of the adsr was enabled during the sustain, the adsr could not be retriggered.
    • To avoid incompatibilities with some hots during the samplerate update, the external inputs are unavailable with the VSTi version. This feature is implemented in a monophonic VSTe (effect): KX-SYNTH-X16-FX.

KX-Synth-X16 is available to download as a freeware VST instrument plug-in for Windows PC.

More information: KX77FREE

comment

KX77FREE updates Kx-Modulad to v2.0

Related: , , , , Posted in news on Nov 18, 2009 - comment 0 comments
KX77FREE Kx-Modulad

KX77FREE has released version 2 of Kx-Modulad, an analog modular synthesizer with stereo SF2 player and an additive synthesis WaveTracer to build high quality waveforms.

Changes in Kx-Modulad

  • New features:
    • New skin with variable background color.
    • Full Midi Learn.
    • New Scope: buffer up to 100 msec.
    • Stereo SF2 Player: to use your SF2 samples with the Kx-Modulad synthesizer.
    • Kx-Synth-x16′s LP 18 filter added.
  • Improvements:
    • The VCOs and the SF2 player have an on/off button.
    • WaveTracer: automatic zero crossing search when out of phase waveforms done.
    • Default path of the “KXDATAS” folder changed to the plug-in location.
    • All automation names rewritten.
    • New html help file.
    • Minor graphic bugs corrected.
    • Improvement of the Fx sleep mode.
    • New SE 1.1 engine.

    Kx-Modulad is available as a freeware VST instrument plug-in for Windows PC.

    More information: KX77FREE / Kx-Modulad

comment

KX77FREE releases KX-Synth-X16-V2

Related: , , , , Posted in news on Jun 22, 2009 - comment 0 comments
KX77FREE KX-SYNTH-X16-V2

KX77FREE has released KX-Synth-X16-V2, a vintage modular polyphonic synthesizer based on the VCS3 structure.

One of the new features of the 2.0 version is the polyphony with a total respect of the original feeling of this synthesizer. A new KXMOD system is implemented to create fat vintage leads or nice polyphonic instruments. A CV and gate sequencer has been added to create real vintage sequences.

KX-Synth-X16-V2 features

  • Common features with the VCS3
    • Three variable shape oscillators,tweaked to simulate the color and bandwidth of Vcs3′s oscillators.
    • 16*16 pin matrix with feedback connections.
    • LP filter, 18 db per octave with self oscillating.
    • Noise generator with EQ.
    • Ring modulation.
    • Two external inputs.
    • XY joystick.
  • Added features
    • Polyphony up to 6 voices.
    • Total control of the polyphony features with the extended KXMOD system.
    • Each voice can be controlled with RELATIVE parameters (KXMOD).
    • Analog sequencer (CV & gate) with a memory of 256 CV and 256 gates, files saved on disk, 2 accent lines, random clock, keyboard input to transpose or to reccord the CV.
    • Mini knobs to adjust each matrix modulation, 0 to 1.
    • Modern skin with notepad and variable color background.
    • Html help file.
    • You can adjust the response curve of the oscillators.
    • The original ASR (trapezoid) is extended to 2 ADSR with Attack Reset mode, Host and internal sequencer synchronization.
    • Delay fx with host synchronization and lfo modulation. It replaces the original spring reverb.
    • LFO, Sample & Hold and third ADSR envelope added (monophonic modulations), they can replace the external inputs (In1, In2).
    • Keyboard scalers.
    • X Y matrix Midi controllers.
    • All main parameters have a Midi CC controller.
    • Velocity to envelope segments, cut off and volume.
    • Midi in splitter.
    • Omni Midi output to control external monophonic instruments
    • and build polyphonic ensemble, each instrument is one voice.
    • Sequencer Midi ouput.
    • KX presets: 27 polyphonic instruments, 12 unison presets, 36 monophonic presets (v 1.04), 17 sequencer demos, 14 tutorial and initialization presets.

KX-Synth-X16-V2 is available as a freeware VST instrument plug-in for Windows PC.

Visit KX77FREE for more information and audio demos.

comment

KX77FREE releases KX-Synth-X16

Related: , , , , Posted in news on Dec 02, 2008 - comment 0 comments

KX77FREE has released KX-Synth-X16, a freeware VCS3 inspired VA type instrument plug-in for Windows PC.

Xavier Kalensky writes:

It is unusual for me to work on VA. But when Burnie asked us Nova and me to do a VCS3 plugin I was interested. This old EMS synthesizer is great with its modern matrix concept, its joystick and its possibility to do feedback patches. Nova collected some docs and Scot Solida sent to Nova his recordings. I used them to research the way to do a close oscillator simulation. I did a new filter based on the KX filter code. Nova built a modern skin. We did not built another SE clone of this synthesizer but added some great features on the original concept.

KX77FREE KX-Synth-X16
KX77FREE KX-Synth-X16 – looking pretty sweet!

KX-Synth-X16 features

  • Common with VCS3:
    • Three variable shape oscillators.
    • Noise generator.
    • Ring modulation.
    • Two external inputs.
    • LP filter, 18 db per octave with self oscillating.
    • Same structure of the matrix (16*16)
    • XY joystick
  • Additional features:
    • Modern skin with notepad and variable color background.
    • Keyboard controls to the oscillators and filter, -10 volts to 10 volts, useful for keyboard scaling.
    • You can adjust the response curve of the oscillators.
    • 256 mini knobs to adjust the plot modulation, 0 to 1.
    • The original ASR (trapezoid) is extended to 2 ADSR with Host synchronization.
    • Delay fx with Host synchronization.
    • Midi controllers.

KX-Synth-X16 is available as a freeware VST instrument for Windows PC.

Visit KX77FREE for more information.

comment